Ubuntu 18.04 can't recognize my SSD











up vote
1
down vote

favorite












I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.



So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).



Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(



So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).



A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.



I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.



Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)



Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.



I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.










share|improve this question






















  • You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
    – Bernard Wei
    Dec 5 at 19:27












  • @BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
    – kishlaya
    Dec 6 at 7:44










  • RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
    – Bernard Wei
    Dec 6 at 19:45















up vote
1
down vote

favorite












I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.



So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).



Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(



So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).



A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.



I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.



Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)



Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.



I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.










share|improve this question






















  • You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
    – Bernard Wei
    Dec 5 at 19:27












  • @BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
    – kishlaya
    Dec 6 at 7:44










  • RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
    – Bernard Wei
    Dec 6 at 19:45













up vote
1
down vote

favorite









up vote
1
down vote

favorite











I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.



So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).



Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(



So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).



A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.



I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.



Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)



Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.



I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.










share|improve this question













I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.



So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).



Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(



So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).



A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.



I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.



Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)



Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.



I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.







dual-boot partitioning raid dmraid






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Dec 5 at 8:31









kishlaya

1062




1062












  • You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
    – Bernard Wei
    Dec 5 at 19:27












  • @BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
    – kishlaya
    Dec 6 at 7:44










  • RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
    – Bernard Wei
    Dec 6 at 19:45


















  • You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
    – Bernard Wei
    Dec 5 at 19:27












  • @BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
    – kishlaya
    Dec 6 at 7:44










  • RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
    – Bernard Wei
    Dec 6 at 19:45
















You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 at 19:27






You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 at 19:27














@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 at 7:44




@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 at 7:44












RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 at 19:45




RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 at 19:45















active

oldest

votes











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1098577%2fubuntu-18-04-cant-recognize-my-ssd%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown






























active

oldest

votes













active

oldest

votes









active

oldest

votes






active

oldest

votes
















draft saved

draft discarded




















































Thanks for contributing an answer to Ask Ubuntu!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.





Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


Please pay close attention to the following guidance:


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1098577%2fubuntu-18-04-cant-recognize-my-ssd%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

flock() on closed filehandle LOCK_FILE at /usr/bin/apt-mirror

Mangá

Eduardo VII do Reino Unido