Can not boot my Windows SSD after installing Ubuntu 18.04 LTS












0















I'm hoping someone might be able to point me in the right direction here, before I have to go nuclear and just re-install everything. I've tried searching and just cannot seem to find an answer relevant to my problem. A while back (6ish months ago) I purchased a 500GB Samsung SSD. I installed Windows 10 on it but left my original Win 10 OS on the HDD that came with my desktop. I had wanted to wait and make sure I had everything off of the HDD that I needed before I used it as storage or for some other reason.



Now, after I had installed Windows 10 on my SSD, anytime I booted up my computer I was always given a choice as to which disk I wanted to boot from. I decided a couple of days ago to download and install Ubuntu (18.04 LTS) on the HDD and leave Windows 10 on the SSD. The installation went fine but now my computer boots straight into Ubuntu, I'm not given a choice as to which disk I want to boot from.



I've read that before installing Ubuntu you should disconnect the Windows 10 SSD before installing Ubuntu to a second hard drive, so I tried that. I d/c the Win 10 SSD, reinstalled Ubuntu, reconnected my Win 10 SSD, PC booted into Ubuntu, went into terminal and did os-prober but nothing happened (there was a pause like the machine was trying to do something but then I was just presented with a new terminal line), subsequently also did sudo update-grub and it showed the linux information but no Windows information came up.



Have I completely screwed the pooch here or is there a chance I can do something to fix this? Thanks.










share|improve this question























  • Dual Boot advice: I suggest you read en.wikipedia.org/wiki/Power-on_self-test , en.wikipedia.org/wiki/BIOS , en.wikipedia.org/wiki/Master_boot_record , en.wikipedia.org/wiki/GUID_Partition_Table , en.wikipedia.org/wiki/UEFI . One will have the Answer. Read the others to understand that one.

    – waltinator
    Jan 15 at 21:55











  • If Windows is installed in UEFI mode, try the EFI menu (some function key at power-up to give you the choice of boot device/os) and select Windows.

    – ubfan1
    Jan 15 at 22:00











  • @ubfan1 unfortunately to get into the EFI menu, I have to be able to get into Windows 10 first.

    – Michael Kerley
    Jan 15 at 22:11











  • No, the EFI menu runs before Windows and allows you to select bootloaders or devices to boot. Windows may offer something, just like grub offers ubuntu and Windows, but neither are the EFI menu. Timing is critical, and easier to type a key if you have fast boot turned off in the BIOS/UEFI Settings. Try F12 at power up until you get a menu of boot choices -- read the initial POST screen which may tell you which key to type.

    – ubfan1
    Jan 15 at 22:31











  • @ubfan1 alright, I figured out what you meant. I tried that and tried to boot directly from my Win 10 SSD. It takes about a solid minute of thinking and then just boots the Ubuntu HDD.

    – Michael Kerley
    Jan 16 at 18:33
















0















I'm hoping someone might be able to point me in the right direction here, before I have to go nuclear and just re-install everything. I've tried searching and just cannot seem to find an answer relevant to my problem. A while back (6ish months ago) I purchased a 500GB Samsung SSD. I installed Windows 10 on it but left my original Win 10 OS on the HDD that came with my desktop. I had wanted to wait and make sure I had everything off of the HDD that I needed before I used it as storage or for some other reason.



Now, after I had installed Windows 10 on my SSD, anytime I booted up my computer I was always given a choice as to which disk I wanted to boot from. I decided a couple of days ago to download and install Ubuntu (18.04 LTS) on the HDD and leave Windows 10 on the SSD. The installation went fine but now my computer boots straight into Ubuntu, I'm not given a choice as to which disk I want to boot from.



I've read that before installing Ubuntu you should disconnect the Windows 10 SSD before installing Ubuntu to a second hard drive, so I tried that. I d/c the Win 10 SSD, reinstalled Ubuntu, reconnected my Win 10 SSD, PC booted into Ubuntu, went into terminal and did os-prober but nothing happened (there was a pause like the machine was trying to do something but then I was just presented with a new terminal line), subsequently also did sudo update-grub and it showed the linux information but no Windows information came up.



Have I completely screwed the pooch here or is there a chance I can do something to fix this? Thanks.










share|improve this question























  • Dual Boot advice: I suggest you read en.wikipedia.org/wiki/Power-on_self-test , en.wikipedia.org/wiki/BIOS , en.wikipedia.org/wiki/Master_boot_record , en.wikipedia.org/wiki/GUID_Partition_Table , en.wikipedia.org/wiki/UEFI . One will have the Answer. Read the others to understand that one.

    – waltinator
    Jan 15 at 21:55











  • If Windows is installed in UEFI mode, try the EFI menu (some function key at power-up to give you the choice of boot device/os) and select Windows.

    – ubfan1
    Jan 15 at 22:00











  • @ubfan1 unfortunately to get into the EFI menu, I have to be able to get into Windows 10 first.

    – Michael Kerley
    Jan 15 at 22:11











  • No, the EFI menu runs before Windows and allows you to select bootloaders or devices to boot. Windows may offer something, just like grub offers ubuntu and Windows, but neither are the EFI menu. Timing is critical, and easier to type a key if you have fast boot turned off in the BIOS/UEFI Settings. Try F12 at power up until you get a menu of boot choices -- read the initial POST screen which may tell you which key to type.

    – ubfan1
    Jan 15 at 22:31











  • @ubfan1 alright, I figured out what you meant. I tried that and tried to boot directly from my Win 10 SSD. It takes about a solid minute of thinking and then just boots the Ubuntu HDD.

    – Michael Kerley
    Jan 16 at 18:33














0












0








0


0






I'm hoping someone might be able to point me in the right direction here, before I have to go nuclear and just re-install everything. I've tried searching and just cannot seem to find an answer relevant to my problem. A while back (6ish months ago) I purchased a 500GB Samsung SSD. I installed Windows 10 on it but left my original Win 10 OS on the HDD that came with my desktop. I had wanted to wait and make sure I had everything off of the HDD that I needed before I used it as storage or for some other reason.



Now, after I had installed Windows 10 on my SSD, anytime I booted up my computer I was always given a choice as to which disk I wanted to boot from. I decided a couple of days ago to download and install Ubuntu (18.04 LTS) on the HDD and leave Windows 10 on the SSD. The installation went fine but now my computer boots straight into Ubuntu, I'm not given a choice as to which disk I want to boot from.



I've read that before installing Ubuntu you should disconnect the Windows 10 SSD before installing Ubuntu to a second hard drive, so I tried that. I d/c the Win 10 SSD, reinstalled Ubuntu, reconnected my Win 10 SSD, PC booted into Ubuntu, went into terminal and did os-prober but nothing happened (there was a pause like the machine was trying to do something but then I was just presented with a new terminal line), subsequently also did sudo update-grub and it showed the linux information but no Windows information came up.



Have I completely screwed the pooch here or is there a chance I can do something to fix this? Thanks.










share|improve this question














I'm hoping someone might be able to point me in the right direction here, before I have to go nuclear and just re-install everything. I've tried searching and just cannot seem to find an answer relevant to my problem. A while back (6ish months ago) I purchased a 500GB Samsung SSD. I installed Windows 10 on it but left my original Win 10 OS on the HDD that came with my desktop. I had wanted to wait and make sure I had everything off of the HDD that I needed before I used it as storage or for some other reason.



Now, after I had installed Windows 10 on my SSD, anytime I booted up my computer I was always given a choice as to which disk I wanted to boot from. I decided a couple of days ago to download and install Ubuntu (18.04 LTS) on the HDD and leave Windows 10 on the SSD. The installation went fine but now my computer boots straight into Ubuntu, I'm not given a choice as to which disk I want to boot from.



I've read that before installing Ubuntu you should disconnect the Windows 10 SSD before installing Ubuntu to a second hard drive, so I tried that. I d/c the Win 10 SSD, reinstalled Ubuntu, reconnected my Win 10 SSD, PC booted into Ubuntu, went into terminal and did os-prober but nothing happened (there was a pause like the machine was trying to do something but then I was just presented with a new terminal line), subsequently also did sudo update-grub and it showed the linux information but no Windows information came up.



Have I completely screwed the pooch here or is there a chance I can do something to fix this? Thanks.







boot dual-boot grub2 windows-10






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Jan 15 at 21:39









Michael KerleyMichael Kerley

1




1













  • Dual Boot advice: I suggest you read en.wikipedia.org/wiki/Power-on_self-test , en.wikipedia.org/wiki/BIOS , en.wikipedia.org/wiki/Master_boot_record , en.wikipedia.org/wiki/GUID_Partition_Table , en.wikipedia.org/wiki/UEFI . One will have the Answer. Read the others to understand that one.

    – waltinator
    Jan 15 at 21:55











  • If Windows is installed in UEFI mode, try the EFI menu (some function key at power-up to give you the choice of boot device/os) and select Windows.

    – ubfan1
    Jan 15 at 22:00











  • @ubfan1 unfortunately to get into the EFI menu, I have to be able to get into Windows 10 first.

    – Michael Kerley
    Jan 15 at 22:11











  • No, the EFI menu runs before Windows and allows you to select bootloaders or devices to boot. Windows may offer something, just like grub offers ubuntu and Windows, but neither are the EFI menu. Timing is critical, and easier to type a key if you have fast boot turned off in the BIOS/UEFI Settings. Try F12 at power up until you get a menu of boot choices -- read the initial POST screen which may tell you which key to type.

    – ubfan1
    Jan 15 at 22:31











  • @ubfan1 alright, I figured out what you meant. I tried that and tried to boot directly from my Win 10 SSD. It takes about a solid minute of thinking and then just boots the Ubuntu HDD.

    – Michael Kerley
    Jan 16 at 18:33



















  • Dual Boot advice: I suggest you read en.wikipedia.org/wiki/Power-on_self-test , en.wikipedia.org/wiki/BIOS , en.wikipedia.org/wiki/Master_boot_record , en.wikipedia.org/wiki/GUID_Partition_Table , en.wikipedia.org/wiki/UEFI . One will have the Answer. Read the others to understand that one.

    – waltinator
    Jan 15 at 21:55











  • If Windows is installed in UEFI mode, try the EFI menu (some function key at power-up to give you the choice of boot device/os) and select Windows.

    – ubfan1
    Jan 15 at 22:00











  • @ubfan1 unfortunately to get into the EFI menu, I have to be able to get into Windows 10 first.

    – Michael Kerley
    Jan 15 at 22:11











  • No, the EFI menu runs before Windows and allows you to select bootloaders or devices to boot. Windows may offer something, just like grub offers ubuntu and Windows, but neither are the EFI menu. Timing is critical, and easier to type a key if you have fast boot turned off in the BIOS/UEFI Settings. Try F12 at power up until you get a menu of boot choices -- read the initial POST screen which may tell you which key to type.

    – ubfan1
    Jan 15 at 22:31











  • @ubfan1 alright, I figured out what you meant. I tried that and tried to boot directly from my Win 10 SSD. It takes about a solid minute of thinking and then just boots the Ubuntu HDD.

    – Michael Kerley
    Jan 16 at 18:33

















Dual Boot advice: I suggest you read en.wikipedia.org/wiki/Power-on_self-test , en.wikipedia.org/wiki/BIOS , en.wikipedia.org/wiki/Master_boot_record , en.wikipedia.org/wiki/GUID_Partition_Table , en.wikipedia.org/wiki/UEFI . One will have the Answer. Read the others to understand that one.

– waltinator
Jan 15 at 21:55





Dual Boot advice: I suggest you read en.wikipedia.org/wiki/Power-on_self-test , en.wikipedia.org/wiki/BIOS , en.wikipedia.org/wiki/Master_boot_record , en.wikipedia.org/wiki/GUID_Partition_Table , en.wikipedia.org/wiki/UEFI . One will have the Answer. Read the others to understand that one.

– waltinator
Jan 15 at 21:55













If Windows is installed in UEFI mode, try the EFI menu (some function key at power-up to give you the choice of boot device/os) and select Windows.

– ubfan1
Jan 15 at 22:00





If Windows is installed in UEFI mode, try the EFI menu (some function key at power-up to give you the choice of boot device/os) and select Windows.

– ubfan1
Jan 15 at 22:00













@ubfan1 unfortunately to get into the EFI menu, I have to be able to get into Windows 10 first.

– Michael Kerley
Jan 15 at 22:11





@ubfan1 unfortunately to get into the EFI menu, I have to be able to get into Windows 10 first.

– Michael Kerley
Jan 15 at 22:11













No, the EFI menu runs before Windows and allows you to select bootloaders or devices to boot. Windows may offer something, just like grub offers ubuntu and Windows, but neither are the EFI menu. Timing is critical, and easier to type a key if you have fast boot turned off in the BIOS/UEFI Settings. Try F12 at power up until you get a menu of boot choices -- read the initial POST screen which may tell you which key to type.

– ubfan1
Jan 15 at 22:31





No, the EFI menu runs before Windows and allows you to select bootloaders or devices to boot. Windows may offer something, just like grub offers ubuntu and Windows, but neither are the EFI menu. Timing is critical, and easier to type a key if you have fast boot turned off in the BIOS/UEFI Settings. Try F12 at power up until you get a menu of boot choices -- read the initial POST screen which may tell you which key to type.

– ubfan1
Jan 15 at 22:31













@ubfan1 alright, I figured out what you meant. I tried that and tried to boot directly from my Win 10 SSD. It takes about a solid minute of thinking and then just boots the Ubuntu HDD.

– Michael Kerley
Jan 16 at 18:33





@ubfan1 alright, I figured out what you meant. I tried that and tried to boot directly from my Win 10 SSD. It takes about a solid minute of thinking and then just boots the Ubuntu HDD.

– Michael Kerley
Jan 16 at 18:33










0






active

oldest

votes











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1110071%2fcan-not-boot-my-windows-ssd-after-installing-ubuntu-18-04-lts%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























0






active

oldest

votes








0






active

oldest

votes









active

oldest

votes






active

oldest

votes
















draft saved

draft discarded




















































Thanks for contributing an answer to Ask Ubuntu!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1110071%2fcan-not-boot-my-windows-ssd-after-installing-ubuntu-18-04-lts%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

flock() on closed filehandle LOCK_FILE at /usr/bin/apt-mirror

Mangá

 ⁒  ․,‪⁊‑⁙ ⁖, ⁇‒※‌, †,⁖‗‌⁝    ‾‸⁘,‖⁔⁣,⁂‾
”‑,‥–,‬ ,⁀‹⁋‴⁑ ‒ ,‴⁋”‼ ⁨,‷⁔„ ‰′,‐‚ ‥‡‎“‷⁃⁨⁅⁣,⁔
⁇‘⁔⁡⁏⁌⁡‿‶‏⁨ ⁣⁕⁖⁨⁩⁥‽⁀  ‴‬⁜‟ ⁃‣‧⁕‮ …‍⁨‴ ⁩,⁚⁖‫ ,‵ ⁀,‮⁝‣‣ ⁑  ⁂– ․, ‾‽ ‏⁁“⁗‸ ‾… ‹‡⁌⁎‸‘ ‡⁏⁌‪ ‵⁛ ‎⁨ ―⁦⁤⁄⁕