Bdtyktl

I'm trying to connect to the corporate VPN from Kubuntu 17.10. I have network-manager-l2tp installed (version 1.2.8). The output I'm getting:

Nov 28 17:20:48 T460 NetworkManager[667]: initiating Main Mode IKE_SA 41d2e76d-a4c4-4f56-bd6a-58ad795af332[1] to xxx.xxx.xxx.xxx

Nov 28 17:20:48 T460 NetworkManager[667]: generating ID_PROT request 0 [ SA V V V V V ]

Nov 28 17:20:48 T460 NetworkManager[667]: sending packet: from 192.168.43.232[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

Nov 28 17:20:48 T460 NetworkManager[667]: sending retransmit 1 of request message ID 0, seq 1

Nov 28 17:20:48 T460 NetworkManager[667]: sending packet: from 192.168.43.232[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

Nov 28 17:20:48 T460 NetworkManager[667]: destroying IKE_SA in state CONNECTING without notification

Nov 28 17:20:48 T460 NetworkManager[667]: establishing connection '41d2e76d-a4c4-4f56-bd6a-58ad795af332' failed

Nov 28 17:20:48 T460 nm-l2tp-service[3673]: g_dbus_method_invocation_take_error: assertion 'error != NULL' failed

Nov 28 17:20:48 T460 NetworkManager[667]: <info>  [1511889648.3131] vpn-connection[0x55fe5d8fe2f0,41d2e76d-a4c4-4f56-bd6a-58ad795af332,"WorkVPN",0]: VPN service disappeared

Nov 28 17:20:48 T460 NetworkManager[667]: <warn>  [1511889648.3161] vpn-connection[0x55fe5d8fe2f0,41d2e76d-a4c4-4f56-bd6a-58ad795af332,"WorkVPN",0]: VPN connection: failed to connect: 'Message recipient disconnected from message bus without replying'

Nov 28 17:23:58 T460 NetworkManager[667]: <info>  [1511889838.9310] audit: op="connection-activate" uuid="41d2e76d-a4c4-4f56-bd6a-58ad795af332" name="WorkVPN" pid=1017 uid=1000 result="success"

Nov 28 17:23:58 T460 NetworkManager[667]: <info>  [1511889838.9371] vpn-connection[0x55fe5d8fe4e0,41d2e76d-a4c4-4f56-bd6a-58ad795af332,"WorkVPN",0]: Started the VPN service, PID 3759

Nov 28 17:23:58 T460 NetworkManager[667]: <info>  [1511889838.9477] vpn-connection[0x55fe5d8fe4e0,41d2e76d-a4c4-4f56-bd6a-58ad795af332,"WorkVPN",0]: Saw the service appear; activating connection

Nov 28 17:24:01 T460 nm-l2tp-service[3759]: Check port 1701

Nov 28 17:24:01 T460 NetworkManager[667]: Stopping strongSwan IPsec failed: starter is not running

Nov 28 17:24:03 T460 NetworkManager[667]: Starting strongSwan 5.5.1 IPsec [starter]...

Nov 28 17:24:03 T460 NetworkManager[667]: Loading config setup

Nov 28 17:24:03 T460 NetworkManager[667]: Loading conn '41d2e76d-a4c4-4f56-bd6a-58ad795af332'

Nov 28 17:24:03 T460 NetworkManager[667]: found netkey IPsec stack

Nov 28 17:24:03 T460 charon: 00[DMN] Starting IKE charon daemon (strongSwan 5.5.1, Linux 4.14.2-041402-generic, x86_64)

Nov 28 17:24:03 T460 charon: 00[CFG] loading ca certificates from '/etc/ipsec.d/cacerts'

Nov 28 17:24:03 T460 charon: 00[CFG] loading aa certificates from '/etc/ipsec.d/aacerts'

Nov 28 17:24:03 T460 charon: 00[CFG] loading ocsp signer certificates from '/etc/ipsec.d/ocspcerts'

Nov 28 17:24:03 T460 charon: 00[CFG] loading attribute certificates from '/etc/ipsec.d/acerts'

Nov 28 17:24:03 T460 charon: 00[CFG] loading crls from '/etc/ipsec.d/crls'

Nov 28 17:24:03 T460 charon: 00[CFG] loading secrets from '/etc/ipsec.secrets'

Nov 28 17:24:03 T460 charon: 00[CFG] loading secrets from '/etc/ipsec.d/nm-l2tp-ipsec-41d2e76d-a4c4-4f56-bd6a-58ad795af332.secrets'

Nov 28 17:24:03 T460 charon: 00[CFG]   loaded IKE secret for %any

Nov 28 17:24:03 T460 charon: 00[LIB] loaded plugins: charon test-vectors aesni aes rc2 sha2 sha1 md4 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs7 pkcs8 pkcs12 pgp dnskey sshkey pem openssl fips-prf gmp agent xcbc hmac ccm gcm attr kernel-netlink resolve socket-default connmark stroke updown eap-mschapv2 xauth-generic

Nov 28 17:24:03 T460 charon: 00[LIB] dropped capabilities, running as uid 0, gid 0

Nov 28 17:24:03 T460 charon: 00[JOB] spawning 16 worker threads

Nov 28 17:24:03 T460 charon: 05[CFG] received stroke: add connection '41d2e76d-a4c4-4f56-bd6a-58ad795af332'

Nov 28 17:24:03 T460 charon: 05[CFG] added configuration '41d2e76d-a4c4-4f56-bd6a-58ad795af332'

Nov 28 17:24:04 T460 charon: 07[CFG] rereading secrets

Nov 28 17:24:04 T460 charon: 07[CFG] loading secrets from '/etc/ipsec.secrets'

Nov 28 17:24:04 T460 charon: 07[CFG] loading secrets from '/etc/ipsec.d/nm-l2tp-ipsec-41d2e76d-a4c4-4f56-bd6a-58ad795af332.secrets'

Nov 28 17:24:04 T460 charon: 07[CFG]   loaded IKE secret for %any

Nov 28 17:24:04 T460 charon: 10[CFG] received stroke: initiate '41d2e76d-a4c4-4f56-bd6a-58ad795af332'

Nov 28 17:24:04 T460 charon: 11[IKE] initiating Main Mode IKE_SA 41d2e76d-a4c4-4f56-bd6a-58ad795af332[1] to xxx.xxx.xxx.xxx

Nov 28 17:24:04 T460 charon: 11[ENC] generating ID_PROT request 0 [ SA V V V V V ]

Nov 28 17:24:04 T460 charon: 11[NET] sending packet: from 192.168.43.232[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

Nov 28 17:24:08 T460 charon: 12[IKE] sending retransmit 1 of request message ID 0, seq 1

Nov 28 17:24:08 T460 charon: 12[NET] sending packet: from 192.168.43.232[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

Nov 28 17:24:14 T460 NetworkManager[667]: Stopping strongSwan IPsec...

Nov 28 17:24:14 T460 charon: 00[DMN] signal of type SIGINT received. Shutting down

Nov 28 17:24:14 T460 charon: 00[IKE] destroying IKE_SA in state CONNECTING without notification

Nov 28 17:24:14 T460 NetworkManager[667]: initiating Main Mode IKE_SA 41d2e76d-a4c4-4f56-bd6a-58ad795af332[1] to xxx.xxx.xxx.xxx

Nov 28 17:24:14 T460 NetworkManager[667]: generating ID_PROT request 0 [ SA V V V V V ]

Nov 28 17:24:14 T460 NetworkManager[667]: sending packet: from 192.168.43.232[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

Nov 28 17:24:14 T460 NetworkManager[667]: sending retransmit 1 of request message ID 0, seq 1

Nov 28 17:24:14 T460 NetworkManager[667]: sending packet: from 192.168.43.232[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

Nov 28 17:24:14 T460 NetworkManager[667]: destroying IKE_SA in state CONNECTING without notification

Nov 28 17:24:14 T460 NetworkManager[667]: establishing connection '41d2e76d-a4c4-4f56-bd6a-58ad795af332' failed

Nov 28 17:24:14 T460 nm-l2tp-service[3759]: g_dbus_method_invocation_take_error: assertion 'error != NULL' failed

Nov 28 17:24:14 T460 NetworkManager[667]: <info>  [1511889854.5718] vpn-connection[0x55fe5d8fe4e0,41d2e76d-a4c4-4f56-bd6a-58ad795af332,"WorkVPN",0]: VPN plugin: state changed: stopped (6)

Nov 28 17:24:14 T460 NetworkManager[667]: <info>  [1511889854.5779] vpn-connection[0x55fe5d8fe4e0,41d2e76d-a4c4-4f56-bd6a-58ad795af332,"WorkVPN",0]: VPN service disappeared

Nov 28 17:24:14 T460 NetworkManager[667]: <warn>  [1511889854.5803] vpn-connection[0x55fe5d8fe4e0,41d2e76d-a4c4-4f56-bd6a-58ad795af332,"WorkVPN",0]: VPN connection: failed to connect: 'Message recipient disconnected from message bus without replying'

EDIT:

Here's the debug info output:

van@z97:/opt/testing$ sudo /usr/lib/NetworkManager/nm-l2tp-service --debug

nm-l2tp[24282] <debug> nm-l2tp-service (version 1.2.8) starting...

nm-l2tp[24282] <debug>  uses default --bus-name "org.freedesktop.NetworkManager.l2tp"

nm-l2tp[24282] <info>  ipsec enable flag: yes

** Message: Check port 1701

** Message: Can't bind to port 1701

nm-l2tp[24282] <warn>  L2TP port 1701 is busy, using ephemeral.

connection

        id : "Work" (s)

        uuid : "71468d41-cd5a-4c91-a70a-c6bc7e1db86a" (s)

        interface-name : NULL (sd)

        type : "vpn" (s)

        permissions : ["user:van:"] (s)

        autoconnect : TRUE (sd)

        autoconnect-priority : 0 (sd)

        autoconnect-retries : -1 (sd)

        timestamp : 0 (sd)

        read-only : FALSE (sd)

        zone : NULL (sd)

        master : NULL (sd)

        slave-type : NULL (sd)

        autoconnect-slaves : ((NMSettingConnectionAutoconnectSlaves) NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES_DEFAULT) (sd)

        secondaries : NULL (sd)

        gateway-ping-timeout : 0 (sd)

        metered : ((NMMetered) NM_METERED_UNKNOWN) (sd)

        lldp : -1 (sd)

        stable-id : NULL (sd)





ipv6

        method : "auto" (s)

        dns :  (s)

        dns-search :  (s)

        dns-options : NULL (sd)

        dns-priority : 0 (sd)

        addresses : ((GPtrArray*) 0x5645b3895ae0) (s)

        gateway : NULL (sd)

        routes : ((GPtrArray*) 0x5645b3895ae0) (s)

        route-metric : -1 (sd)

        ignore-auto-routes : FALSE (sd)

        ignore-auto-dns : FALSE (sd)

        dhcp-hostname : NULL (sd)

        dhcp-send-hostname : TRUE (sd)

        never-default : FALSE (sd)

        may-fail : TRUE (sd)

        dad-timeout : -1 (sd)

        dhcp-timeout : 0 (sd)

        ip6-privacy : ((NMSettingIP6ConfigPrivacy) NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN) (sd)

        addr-gen-mode : 1 (sd)

        token : NULL (sd)





proxy

        method : 0 (sd)

        browser-only : FALSE (sd)

        pac-url : NULL (sd)

        pac-script : NULL (sd)





vpn

        service-type : "org.freedesktop.NetworkManager.l2tp" (s)

        user-name : "van" (s)

        persistent : FALSE (sd)

        data : ((GHashTable*) 0x7fef54006de0) (s)

        secrets : ((GHashTable*) 0x7fef54006cc0) (s)

        timeout : 0 (sd)





ipv4

        method : "auto" (s)

        dns :  (s)

        dns-search :  (s)

        dns-options : NULL (sd)

        dns-priority : 0 (sd)

        addresses : ((GPtrArray*) 0x5645b38957a0) (s)

        gateway : NULL (sd)

        routes : ((GPtrArray*) 0x5645b3895a00) (s)

        route-metric : -1 (sd)

        ignore-auto-routes : FALSE (sd)

        ignore-auto-dns : FALSE (sd)

        dhcp-hostname : NULL (sd)

        dhcp-send-hostname : TRUE (sd)

        never-default : FALSE (sd)

        may-fail : TRUE (sd)

        dad-timeout : -1 (sd)

        dhcp-timeout : 0 (sd)

        dhcp-client-id : NULL (sd)

        dhcp-fqdn : NULL (sd)





nm-l2tp[24282] <info>  starting ipsec

Stopping strongSwan IPsec failed: starter is not running

Starting strongSwan 5.5.1 IPsec [starter]...

Loading config setup

Loading conn '71468d41-cd5a-4c91-a70a-c6bc7e1db86a'

found netkey IPsec stack

nm-l2tp[24282] <info>  Spawned ipsec up script with PID 24345.

initiating Main Mode IKE_SA 71468d41-cd5a-4c91-a70a-c6bc7e1db86a[1] to xxx.xxx.xxx.xxx

generating ID_PROT request 0 [ SA V V V V V ]

sending packet: from 192.168.0.2[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

sending retransmit 1 of request message ID 0, seq 1

sending packet: from 192.168.0.2[500] to xxx.xxx.xxx.xxx[500] (240 bytes)

nm-l2tp[24282] <warn>  Timeout trying to establish IPsec connection

nm-l2tp[24282] <info>  Terminating ipsec script with PID 24345.

Stopping strongSwan IPsec...

destroying IKE_SA in state CONNECTING without notification

establishing connection '71468d41-cd5a-4c91-a70a-c6bc7e1db86a' failed

nm-l2tp[24282] <warn>  Could not establish IPsec tunnel.



(nm-l2tp-service:24282): GLib-GIO-CRITICAL **: g_dbus_method_invocation_take_error: assertion 'error != NULL' failed

After spending a few hours digging around, I found out what the problem is, and the solution.

The problem:

1. Linux no longer supports the 3DES cipher, but many appliances still use it.


2. Kubuntu 17.10 is missing phase1 and phase2 algorithm entry fields under IPSec Settings (this is a known bug), which are needed to setup an L2TP/IPSec connection to use 3DES.

The solution:

1. Install the latest version of KDE Plasma from the "backports" PPA.


2. Reboot, then create a new L2TP/IPSec VPN connection - phase1 and phase2 algorithm entry fields should now be present.


3. For the Phase1 Algorithm, enter: 3des-sha1-modp1024!


4. For the Phase2 Algorithm, enter: 3des-sha1!

From memory, I did the following:

sudo add-apt-repository ppa:kubuntu-ppa/backports

sudo apt update && sudo apt upgrade

sudo reboot

sudo apt install network-manager-l2tp-gnome

sudo apt install strongswan

sudo apt install libstrongswan-extra-plugins

sudo apt install libcharon-extra-plugins

Reboot, then add L2TP/IPSec as normal. You should now see the Phase1 and Phase2 algorithm textboxes as show in the attached image.

It's important to note that the above steps will not work if you have installed the latest Linux kernel (4.14 or higher, I believe), so it is highly likely that this workaround to get L2TP/IPSec working with the 3DES cipher will not work when the up and coming *Ubuntu 18.04 LTS is released.

I know that this question was in regards to getting L2TP/IPSec working on Kubuntu 17.10. However, 18.04 is out now, and here's how I get L2TP/IPSec working on Kubuntu 18.04:

1. $ sudo apt install network-manager-l2tp


2. $ sudo stop xl2tpd.service


3. $ sudo systemctl disable xl2tpd.service

Messing around with backports is not longer required as the Phase1 algorithms and Phase2 algorithms text-inputs are now included in the default Network Manager.

The kernel 4.14 bug is related to the following commit :

• https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/net/xfrm?h=v4.14.8&id=c9f3f813d462c72dbe412cee6a5cbacf13c4ad5e

That kernel 4.14 commit breaks IPsec transportation mode when a wildcard address is used on the client side as is the case with network-manager-l2tp. The commit was reverted in kernel-4.15-rc1 :

• https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/net/xfrm?h=v4.15-rc1&id=94802151894d482e82c324edf2c658f8e6b96508

Unfortunately the reversion commit reintroduces a stack out-of-bounds bug. We might need to wait for the kernel 4.14 branch to get a fix after kernel 4.15 is released. More details in this netdev linux kernel mailing list thread :

• https://patchwork.ozlabs.org/patch/838470/