Bdtyktl

When tried to boot up Kernel uImage of an i.MX6q based embedded device, it seems that QEMU crashes with "Unable to handle kernel NULL pointer dereference at virtual address 00000044". Before crashing it displays below errors.

mc16xsd200 spi32765.0: FSB triggered for switch 0

mc16xsd200 spi32765.0: switch 0 port[0] fault[0x0000]

mc16xsd200 spi32765.0: FSOB triggered for switch 0

On the actual device FSB(fault status) and FSOB (fail-safe output) are NOT triggered, boot sequence look like below on actual device.

mc16xsd200 spi32765.0: FSB not triggered for switch 0



/dev/mmcblk0p1: |===mc16xsd200 spi32765.0: FSOB not triggered for switch 0

Below command has been triggered to start the kernel with QEMU and attached is the full output, I m using latest version of QEMU 3.1.0-rc0. Is there a way to work around this problem ? Appreciate any help on this. Thanks

./qemu-3.1.0-rc0/arm-softmmu/qemu-system-arm -machine sabrelite,accel=kvm:tcg -kernel uImage -m 3840 -smp cpus=4 -serial mon:stdio -append "root=/dev/mmcblk0p1 rootfstype=ext2 rw,format=raw" -hda fullcardimage.img



WARNING: Image format was not specified for 'fullcardimage.img' and probing guessed raw.

         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.

         Specify the 'raw' format explicitly to remove the restrictions.

VNC server running on 127.0.0.1:5900

Booting Linux on physical CPU 0x0

Initializing cgroup subsys cpuset

Initializing cgroup subsys cpu

Initializing cgroup subsys cpuacct

Linux version 3.10.53 (build_team@u1004-swb02) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG 1.18.0) ) #1 SMP PREEMPT Tue Jun 13 16:03:05 PDT 2017

CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Machine: i.MX6q 

Truncating memory at 0x10000000 to fit in 32-bit physical address space

memblock reserved of f7fff000 <at> 8000000 for ion

memblock reserved for ramoops : Phys Address = 0xf7eff000, Size 1M

cma: CMA: reserved 512 MiB at 5e000000

Memory policy: ECC disabled, Data cache writealloc

PERCPU: Embedded 8 pages/cpu @f1e20000 s9728 r8192 d14848 u32768

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 946335

Kernel command line: root=/dev/ram0 rw console=ttymxc0,9600 ramdisk_start=0x0 ip=off consoleblank=0 vmalloc=192M enable_wait_mode=off max_loop=64 dmfc=3 earlyprintk

PID hash table entries: 4096 (order: 2, 16384 bytes)

Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)

Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)

Memory: 3710MB = 3710MB total

Memory: 3207368k/3207368k available, 724788k reserved, 1915900K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xf3800000 - 0xff000000   ( 184 MB)

    lowmem  : 0x80000000 - 0xf3000000   (1840 MB)

    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)

    modules : 0x7f000000 - 0x7fe00000   (  14 MB)

      .text : 0x80008000 - 0x80bef39c   (12189 kB)

      .init : 0x80bf0000 - 0x82097600   (21150 kB)

      .data : 0x82098000 - 0x821571d0   ( 765 kB)

       .bss : 0x821571d0 - 0x821f5e1c   ( 636 kB)

SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

Preemptible hierarchical RCU implementation.

NR_IRQS:16 nr_irqs:16 16

L2x0 series cache controller enabled

l2x0: 8 ways, CACHE_ID 0x00000000, AUX_CTRL 0x00000000, Cache size: 65536 B

VPU 352M is enabled!

sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms

CPU identified as i.MX6Q, silicon rev 1.0

Console: colour dummy device 80x30

Calibrating delay loop... 30.92 BogoMIPS (lpj=154624)

pid_max: default: 32768 minimum: 301

Security Framework initialized

SELinux:  Initializing.

Mount-cache hash table entries: 512

Initializing cgroup subsys debug

Initializing cgroup subsys freezer

CPU: Testing write buffer coherency: ok

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

Setting up static identity map for 0x80874930 - 0x80874988

CPU1: Booted secondary processor

CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

CPU2: Booted secondary processor

CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

CPU3: Booted secondary processor

CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

Brought up 4 CPUs

SMP: Total of 4 processors activated (8922.52 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

devtmpfs: initialized

pinctrl core: initialized pinctrl subsystem

regulator-dummy: no parameters

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

Use WDOG1 as reset source

syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered

vdd1p1: 800 <--> 1375 mV at 1100 mV

vdd3p0: 2800 <--> 3150 mV at 3000 mV

vdd2p5: 2000 <--> 2750 mV at 2400 mV

cpu: 725 <--> 1450 mV at 1100 mV

vddpu: 725 <--> 1450 mV at 1100 mV

vddsoc: 725 <--> 1450 mV at 1100 mV

mxs_phy 20c9000.usbphy: using default TX PHY Transmitter Control

mxs_phy 20ca000.usbphy: using default TX PHY Transmitter Control

syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered

imx_mmdc_probe: failed to enable automatic power saving

imx-mmdc: probe of 21b0000.mmdc failed with error -16

syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered

failed to find fsl,imx6sx-romcp regmap

LRU ID = 0

hw-breakpoint: debug architecture 0x4 unsupported.

imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver

bio: create slab <bio-0> at 0

stmp_reset_block(f3858000): module reset timeout

mxs-dma: probe of 110000.dma-apbh failed with error -110

tlv320aic3x-supply: no parameters

ov564x-supply: no parameters

vgaarb: loaded

i2c-core: driver [max17135] using legacy suspend method

i2c-core: driver [max17135] using legacy resume method

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

i2c i2c-0: IMX I2C adapter registered

i2c i2c-1: IMX I2C adapter registered

i2c i2c-2: <i2c_imx_trx_complete> Wait Timeout

pca953x 2-0022: failed reading register

pca953x: probe of 2-0022 failed with error -110

i2c i2c-2: IMX I2C adapter registered

Linux video capture interface: v2.00

pps_core: LinuxPPS API ver. 1 registered

pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

PTP clock support registered

imx-ipuv3 2400000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)

imx-ipuv3 2800000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)

imx-ipuv3 2800000.ipu: Registered IPU ID: 1

MIPI CSI2 driver module loaded

Advanced Linux Sound Architecture Driver Initialized.

Bluetooth: Core ver 2.16

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO socket layer initialized

cfg80211: Calling CRDA to update world regulatory domain

pureg-dummy: no parameters

Switching to clocksource mxc_timer1

usb_pacusb_init: PACUSB driver version 2.29

usbcore: registered new interface driver pacusb

gpio-wdt: watchdog gpio (9) allocated

gpio-wdt: hwtick timer started, period = 2 secs

NET: Registered protocol family 2

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

TCP bind hash table entries: 16384 (order: 5, 131072 bytes)

TCP: Hash tables configured (established 16384 bind 16384)

TCP: reno registered

UDP hash table entries: 1024 (order: 3, 32768 bytes)

UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 1 counters available

mxc_epit: probe of 20d0000.epit failed with error -22

mxc_epit: probe of 20d4000.epit failed with error -22

console [pstore-1] enabled

ramoops: attached 0x100000@0xf7eff000, ecc: 0/0

mxc_ramoops device success loaded

futex hash table entries: 1024 (order: 4, 65536 bytes)

audit: initializing netlink socket (disabled)

type=2000 audit(67.620:1): initialized

bounce pool size: 64 pages

VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

squashfs: version 4.0 (2009/01/31) Phillip Lougher

NFS: Registering the id_resolver key type

Key type id_resolver registered

Key type id_legacy registered

NTFS driver 2.1.30 [Flags: R/W DEBUG].

jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

fuse init (API version 7.22)

msgmni has been set to 3546

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

mxc_sdc_fb fb.20: registered mxc display driver lcd_tc358766

imx-ipuv3 2400000.ipu: Unsupported burst size 1

imx-sdma 20ec000.sdma: no iram assigned, using external mem

imx-sdma 20ec000.sdma: Timeout waiting for CH0 ready

imx-sdma 20ec000.sdma: loaded firmware 1.1

imx-sdma 20ec000.sdma: initialized

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

pfuze100-regulator 0-0008: unrecognized pfuze chip ID!

pfuze100-regulator: probe of 0-0008 failed with error -110

Serial: IMX driver

2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX

console [ttymxc0] enabled

serial: Freescale lpuart driver

imx sema4 driver is registered.

[drm] Initialized drm 1.1.0 20060810

[drm] Initialized vivante 1.0.0 20120216 on minor 0

brd: module loaded

loop: module loaded

at24 0-0054: 256 byte 24c02 EEPROM, writable, 1 bytes/write

at24 0-0055: 256 byte 24c02 EEPROM, writable, 1 bytes/write

at24 0-0056: 256 byte 24c02 EEPROM, writable, 1 bytes/write

at24 0-0057: 256 byte 24c02 EEPROM, writable, 1 bytes/write

at24 2-0050: 128 byte 24c01 EEPROM, writable, 1 bytes/write

imx-sdma 20ec000.sdma: Timeout waiting for CH0 ready

spi_imx 2008000.ecspi: error in TX dma configuration.

spi_imx 2008000.ecspi: dma setup error,use pio instead

m25p80 spi32766.0: found sst25vf016b, expected w25q64

m25p80 spi32766.0: sst25vf016b (2048 Kbytes)

3 ofpart partitions found on MTD device spi32766.0

Creating 3 MTD partitions on "spi32766.0":

0x000000000000-0x000000040000 : "bootloader"

0x000000040000-0x000000041000 : "config"

0x000000041000-0x000000800000 : "minikernel"

mtd: partition "minikernel" extends beyond the end of device "spi32766.0" -- size truncated to 0x1bf000

spi_imx 2008000.ecspi: probed

imx-sdma 20ec000.sdma: Timeout waiting for CH0 ready

spi_imx 200c000.ecspi: error in TX dma configuration.

spi_imx 200c000.ecspi: dma setup error,use pio instead

spi_imx 200c000.ecspi: probed

tun: Universal TUN/TAP device driver, 1.6

tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

fec 2188000.ethernet eth0: registered PHC device 0

usbcore: registered new interface driver asix

usbcore: registered new interface driver ax88179_178a

usbcore: registered new interface driver cdc_ether

usbcore: registered new interface driver net1080

usbcore: registered new interface driver cdc_subset

usbcore: registered new interface driver zaurus

usbcore: registered new interface driver cdc_ncm

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-pci: EHCI PCI platform driver

usbcore: registered new interface driver cdc_acm

cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

usbcore: registered new interface driver usb-storage

usbcore: registered new interface driver usbserial

usbcore: registered new interface driver option

usbserial: USB Serial support registered for GSM modem (1-port)

stmp_reset_block(f380e030): module reset timeout

ci_hdrc ci_hdrc.0: unable to init phy: -110

ci_hdrc: probe of ci_hdrc.0 failed with error -110

mousedev: PS/2 mouse device common for all mice

usbcore: registered new interface driver xpad

usbcore: registered new interface driver usb_acecad

usbcore: registered new interface driver aiptek

usbcore: registered new interface driver gtco

usbcore: registered new interface driver hanwang

usbcore: registered new interface driver kbtab

usbcore: registered new interface driver wacom

i2c-core: driver [isl29023] using legacy suspend method

i2c-core: driver [isl29023] using legacy resume method

snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0

i2c /dev entries driver

IR NEC protocol handler initialized

IR RC5(x) protocol handler initialized

IR RC6 protocol handler initialized

IR JVC protocol handler initialized

IR Sony protocol handler initialized

IR RC5 (streamzap) protocol handler initialized

IR SANYO protocol handler initialized

IR MCE Keyboard/mouse protocol handler initialized

ov5640 2-003c: no sensor pwdn pin available

mxc_v4l2_output v4l2_out.17: V4L2 device registered as video16

mxc_v4l2_output v4l2_out.17: V4L2 device registered as video17

usbcore: registered new interface driver uvcvideo

USB Video Class driver (1.1.1)

gspca_main: v2.14.0 registered

Driver for 1-wire Dallas network protocol.

w1-gpio onewire.15: unable to select pin group

i2c i2c-2: <i2c_imx_trx_complete> Wait Timeout

ads1015 2-0048: failed to read i2c client

ads1015: probe of 2-0048 failed with error -110

i2c i2c-2: <i2c_imx_trx_complete> Wait Timeout

lm75: probe of 2-004e failed with error -110

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com

cpuidle: using governor ladder

cpuidle: using governor menu

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

mmc0: no vqmmc regulator found

mmc0: no vmmc regulator found

mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA

mmc2: no vqmmc regulator found

mmc2: no vmmc regulator found

mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA

mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed

mxc_asrc 2034000.asrc: mxc_asrc registered

mxc_vpu 2040000.vpu: VPU initialized

hidraw: raw HID events driver (C) Jiri Kosina

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

ashmem: initialized

logger: created 256K log 'log_main'

logger: created 256K log 'log_events'

logger: created 256K log 'log_radio'

logger: created 256K log 'log_system'

usbcore: registered new interface driver snd-usb-audio

tlv320aic3x-codec 0-0019: ASoC: mux Right Line1L Mux has no paths

tlv320aic3x-codec 0-0019: ASoC: mux Left Line1R Mux has no paths

imx-tlv320aic3x sound.25:  tlv320aic3x-hifi <-> 202c000.ssi mapping ok

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

input: cpuimxaudiob Headphone Jack b as /devices/soc0/sound.25/sound/card0/input0

Microchip ICSP driver initialized

Unknown LRU SUBTYPE for Unit Id = 0

Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti

input: proximity_io as /devices/virtual/input/input1

Initialized proximity_io driver

input: tricolorled_io as /devices/virtual/input/input2

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

Initialized tricolorled_io driver

tps61195 WLED driver

tps61195: no chip?

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

mma8453: probe of 0-001c failed with error -22

mma8453_init : no chip?

bh1730: ALS driver

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

bh1730: no chips??

ltc3350: High Current Supercapacitor Backup Controller and System Monitor Driver

ltc3350: no chips??

retract_mech: Retractable Monitor Mechanism Controller Driver (supporting firmware 00.01.0.11)

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

retract_mech: no chips??

mc16xsd200 spi32765.0: skipping open load detection for switch 0

mc16xsd200 spi32765.0: probed

tc358766_probe started

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

i2c i2c-0: <i2c_imx_trx_complete> Wait Timeout

mc16xsd200 spi32765.0: FSB triggered for switch 0

mc16xsd200 spi32765.0: switch 0 port[0] fault[0x0000]

mc16xsd200 spi32765.0: FSOB triggered for switch 0

Unable to handle kernel NULL pointer dereference at virtual address 00000044

pgd = 80004000

[00000044] *pgd=00000000

Internal error: Oops: 17 [#1] PREEMPT SMP ARM

Modules linked in:

CPU: 3 PID: 21 Comm: kworker/3:0 Not tainted 3.10.53 #1

Workqueue: events mc16xsd200_fsob_irq_work_func

task: f209f300 ti: f20f6000 task.ti: f20f6000