How do I force audio to play through headphone jack?
up vote
1
down vote
favorite
My laptop has a slightly damage headphone jack preventing automatic detection of headphones. Other than that, the jack is fine. In Ubuntu, it is possible to force audio to play through the jack (Shows up as Headphones(Unplugged) on PulseAudio.). Using that I've not had a single problem. I was hoping there would be a similar way in Windows.
windows-7 audio headphones
asked Aug 28 '14 at 4:19
Cameron346
612
add a comment |
up vote
1
down vote
favorite
My laptop has a slightly damage headphone jack preventing automatic detection of headphones. Other than that, the jack is fine. In Ubuntu, it is possible to force audio to play through the jack (Shows up as Headphones(Unplugged) on PulseAudio.). Using that I've not had a single problem. I was hoping there would be a similar way in Windows.
windows-7 audio headphones
asked Aug 28 '14 at 4:19
Cameron346
612
the jack cannot output sound without output device, the jack is only a jack.
– Nick
Jul 28 at 19:33
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
My laptop has a slightly damage headphone jack preventing automatic detection of headphones. Other than that, the jack is fine. In Ubuntu, it is possible to force audio to play through the jack (Shows up as Headphones(Unplugged) on PulseAudio.). Using that I've not had a single problem. I was hoping there would be a similar way in Windows.
windows-7 audio headphones
asked Aug 28 '14 at 4:19
Cameron346
612
My laptop has a slightly damage headphone jack preventing automatic detection of headphones. Other than that, the jack is fine. In Ubuntu, it is possible to force audio to play through the jack (Shows up as Headphones(Unplugged) on PulseAudio.). Using that I've not had a single problem. I was hoping there would be a similar way in Windows.
windows-7 audio headphones
windows-7 audio headphones
asked Aug 28 '14 at 4:19
Cameron346
612
asked Aug 28 '14 at 4:19
Cameron346
612
asked Aug 28 '14 at 4:19
Cameron346
612
asked Aug 28 '14 at 4:19
Cameron346
612
asked Aug 28 '14 at 4:19
Cameron346
612
612
the jack cannot output sound without output device, the jack is only a jack.
– Nick
Jul 28 at 19:33
add a comment |
the jack cannot output sound without output device, the jack is only a jack.
– Nick
Jul 28 at 19:33
the jack cannot output sound without output device, the jack is only a jack.
– Nick
Jul 28 at 19:33
the jack cannot output sound without output device, the jack is only a jack.
– Nick
Jul 28 at 19:33
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
- Plug in your headphones, and adjust any inline volume or power controls so that you should be able to hear any sound that is sent to them.
- Right-click the volume control icon in the system tray.
- Select "Playback Devices".
- Click on the volume control icon again, and adjust the volume so that it triggers a sound event.
- This serves a couple purposes. First, it lets you make sure the audio isn't already going to the headphones. Secondly, it should show you which Playback Device is currently active in the window we opened earlier by way of the output level indicators. (The same device should also have a green check next to it.)
- If you followed step 1, and you did not hear any sound through the headphones in step 4, use the Playback Devices dialog to change the default device to something other than the current one.
- Repeat steps 4 & 5 until success is achieved, or all Playback Device options have failed.
Depending on your system's configuration and drivers, it may not be clear which of the Playback Devices will send audio to the headphones. Some may actually be labeled as headphones, some may be labeled as line-out, or the headphone output may be non-obviously bundled with another device. For example, my system uses the same Playback Device to address both the headphones and the laptop speakers - it automatically switches when something's plugged into the headphone jack.
Also be aware that, if there are problems with the headphone jack on your computer, it is possible that these settings may not persist if the jack is disturbed or experiences a malfunction. If this is the case, your only solution is to get the jack fixed, or get some headphones that take input from USB.
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
1
In Windows 7, you cannot select a device as default when it is marked "not plugged in". Or at least, I don't see any way to do so. This makes step five impossible when the machine does not detect that headphones are plugged in (which I've found happens fairly often on my machine even though I do not think the jack is damaged).
– Kyle Strand
Feb 3 '17 at 22:12
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f804048%2fhow-do-i-force-audio-to-play-through-headphone-jack%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
- Plug in your headphones, and adjust any inline volume or power controls so that you should be able to hear any sound that is sent to them.
- Right-click the volume control icon in the system tray.
- Select "Playback Devices".
- Click on the volume control icon again, and adjust the volume so that it triggers a sound event.
- This serves a couple purposes. First, it lets you make sure the audio isn't already going to the headphones. Secondly, it should show you which Playback Device is currently active in the window we opened earlier by way of the output level indicators. (The same device should also have a green check next to it.)
- If you followed step 1, and you did not hear any sound through the headphones in step 4, use the Playback Devices dialog to change the default device to something other than the current one.
- Repeat steps 4 & 5 until success is achieved, or all Playback Device options have failed.
Depending on your system's configuration and drivers, it may not be clear which of the Playback Devices will send audio to the headphones. Some may actually be labeled as headphones, some may be labeled as line-out, or the headphone output may be non-obviously bundled with another device. For example, my system uses the same Playback Device to address both the headphones and the laptop speakers - it automatically switches when something's plugged into the headphone jack.
Also be aware that, if there are problems with the headphone jack on your computer, it is possible that these settings may not persist if the jack is disturbed or experiences a malfunction. If this is the case, your only solution is to get the jack fixed, or get some headphones that take input from USB.
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
1
In Windows 7, you cannot select a device as default when it is marked "not plugged in". Or at least, I don't see any way to do so. This makes step five impossible when the machine does not detect that headphones are plugged in (which I've found happens fairly often on my machine even though I do not think the jack is damaged).
– Kyle Strand
Feb 3 '17 at 22:12
add a comment |
up vote
0
down vote
- Plug in your headphones, and adjust any inline volume or power controls so that you should be able to hear any sound that is sent to them.
- Right-click the volume control icon in the system tray.
- Select "Playback Devices".
- Click on the volume control icon again, and adjust the volume so that it triggers a sound event.
- This serves a couple purposes. First, it lets you make sure the audio isn't already going to the headphones. Secondly, it should show you which Playback Device is currently active in the window we opened earlier by way of the output level indicators. (The same device should also have a green check next to it.)
- If you followed step 1, and you did not hear any sound through the headphones in step 4, use the Playback Devices dialog to change the default device to something other than the current one.
- Repeat steps 4 & 5 until success is achieved, or all Playback Device options have failed.
Depending on your system's configuration and drivers, it may not be clear which of the Playback Devices will send audio to the headphones. Some may actually be labeled as headphones, some may be labeled as line-out, or the headphone output may be non-obviously bundled with another device. For example, my system uses the same Playback Device to address both the headphones and the laptop speakers - it automatically switches when something's plugged into the headphone jack.
Also be aware that, if there are problems with the headphone jack on your computer, it is possible that these settings may not persist if the jack is disturbed or experiences a malfunction. If this is the case, your only solution is to get the jack fixed, or get some headphones that take input from USB.
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
1
In Windows 7, you cannot select a device as default when it is marked "not plugged in". Or at least, I don't see any way to do so. This makes step five impossible when the machine does not detect that headphones are plugged in (which I've found happens fairly often on my machine even though I do not think the jack is damaged).
– Kyle Strand
Feb 3 '17 at 22:12
add a comment |
up vote
0
down vote
up vote
0
down vote
- Plug in your headphones, and adjust any inline volume or power controls so that you should be able to hear any sound that is sent to them.
- Right-click the volume control icon in the system tray.
- Select "Playback Devices".
- Click on the volume control icon again, and adjust the volume so that it triggers a sound event.
- This serves a couple purposes. First, it lets you make sure the audio isn't already going to the headphones. Secondly, it should show you which Playback Device is currently active in the window we opened earlier by way of the output level indicators. (The same device should also have a green check next to it.)
- If you followed step 1, and you did not hear any sound through the headphones in step 4, use the Playback Devices dialog to change the default device to something other than the current one.
- Repeat steps 4 & 5 until success is achieved, or all Playback Device options have failed.
Depending on your system's configuration and drivers, it may not be clear which of the Playback Devices will send audio to the headphones. Some may actually be labeled as headphones, some may be labeled as line-out, or the headphone output may be non-obviously bundled with another device. For example, my system uses the same Playback Device to address both the headphones and the laptop speakers - it automatically switches when something's plugged into the headphone jack.
Also be aware that, if there are problems with the headphone jack on your computer, it is possible that these settings may not persist if the jack is disturbed or experiences a malfunction. If this is the case, your only solution is to get the jack fixed, or get some headphones that take input from USB.
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
- Plug in your headphones, and adjust any inline volume or power controls so that you should be able to hear any sound that is sent to them.
- Right-click the volume control icon in the system tray.
- Select "Playback Devices".
- Click on the volume control icon again, and adjust the volume so that it triggers a sound event.
- This serves a couple purposes. First, it lets you make sure the audio isn't already going to the headphones. Secondly, it should show you which Playback Device is currently active in the window we opened earlier by way of the output level indicators. (The same device should also have a green check next to it.)
- If you followed step 1, and you did not hear any sound through the headphones in step 4, use the Playback Devices dialog to change the default device to something other than the current one.
- Repeat steps 4 & 5 until success is achieved, or all Playback Device options have failed.
Depending on your system's configuration and drivers, it may not be clear which of the Playback Devices will send audio to the headphones. Some may actually be labeled as headphones, some may be labeled as line-out, or the headphone output may be non-obviously bundled with another device. For example, my system uses the same Playback Device to address both the headphones and the laptop speakers - it automatically switches when something's plugged into the headphone jack.
Also be aware that, if there are problems with the headphone jack on your computer, it is possible that these settings may not persist if the jack is disturbed or experiences a malfunction. If this is the case, your only solution is to get the jack fixed, or get some headphones that take input from USB.
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
answered Aug 28 '14 at 5:52
Iszi
7,2803689156
7,2803689156
1
In Windows 7, you cannot select a device as default when it is marked "not plugged in". Or at least, I don't see any way to do so. This makes step five impossible when the machine does not detect that headphones are plugged in (which I've found happens fairly often on my machine even though I do not think the jack is damaged).
– Kyle Strand
Feb 3 '17 at 22:12
add a comment |
1
In Windows 7, you cannot select a device as default when it is marked "not plugged in". Or at least, I don't see any way to do so. This makes step five impossible when the machine does not detect that headphones are plugged in (which I've found happens fairly often on my machine even though I do not think the jack is damaged).
– Kyle Strand
Feb 3 '17 at 22:12
1
1
In Windows 7, you cannot select a device as default when it is marked "not plugged in". Or at least, I don't see any way to do so. This makes step five impossible when the machine does not detect that headphones are plugged in (which I've found happens fairly often on my machine even though I do not think the jack is damaged).
– Kyle Strand
Feb 3 '17 at 22:12
In Windows 7, you cannot select a device as default when it is marked "not plugged in". Or at least, I don't see any way to do so. This makes step five impossible when the machine does not detect that headphones are plugged in (which I've found happens fairly often on my machine even though I do not think the jack is damaged).
– Kyle Strand
Feb 3 '17 at 22:12
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f804048%2fhow-do-i-force-audio-to-play-through-headphone-jack%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
the jack cannot output sound without output device, the jack is only a jack.
– Nick
Jul 28 at 19:33