lm sensors: not showing up cpu fan speed and cpu temp

up vote
0
down vote

favorite

chipset I guess ought to be: Nuvoton NCT6793D

nct6793-isa-0290

Adapter: ISA adapter

in0:                       +0.34 V  (min =  +0.00 V, max =  +1.74 V)

in1:                       +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in2:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in3:                       +3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in5:                       +0.15 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in6:                       +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in7:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in8:                       +3.09 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in9:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in10:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in11:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in12:                      +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in13:                      +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in14:                      +0.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

fan1:                      564 RPM  (min =    0 RPM)

fan2:                      549 RPM  (min =    0 RPM)

fan3:                        0 RPM  (min =    0 RPM)

fan4:                        0 RPM  (min =    0 RPM)

fan5:                      718 RPM  (min =    0 RPM)

fan6:                        0 RPM

SYSTIN:                    +30.0°C  (high = +98.0°C, hyst = +95.0°C)  sensor = thermistor

CPUTIN:                    +30.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor

AUXTIN0:                   +30.5°C    sensor = thermistor

AUXTIN1:                   +30.0°C    sensor = thermistor

AUXTIN2:                   +30.0°C    sensor = thermistor

AUXTIN3:                   +93.0°C    sensor = thermistor

PECI Agent 0:              +29.0°C  (high = +98.0°C, hyst = +95.0°C)

                                    (crit = +100.0°C)

PECI Agent 0 Calibration:  +30.0°C  

PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  

PCH_CHIP_TEMP:              +0.0°C  

intrusion0:               ALARM

intrusion1:               ALARM

beep_enable:              disabled



acpitz-virtual-0

Adapter: Virtual device

temp1:        +27.8°C  (crit = +119.0°C)

temp2:        +29.8°C  (crit = +119.0°C)



asus-isa-0000

Adapter: ISA adapter

cpu_fan:        0 RPM



coretemp-isa-0000

Adapter: ISA adapter

Package id 0:  +37.0°C  (high = +80.0°C, crit = +100.0°C)

Core 0:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 1:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 2:        +29.0°C  (high = +80.0°C, crit = +100.0°C)

Core 3:        +37.0°C  (high = +80.0°C, crit = +100.0°C)

2 intake fans and one outtake fans are showing up as it should be.

any thoughts, why cpu temp/fan speed not showing up explicitly?

asked Nov 30 at 17:47

sevenfourk

1114

add a comment |

up vote
0
down vote

favorite

chipset I guess ought to be: Nuvoton NCT6793D

nct6793-isa-0290

Adapter: ISA adapter

in0:                       +0.34 V  (min =  +0.00 V, max =  +1.74 V)

in1:                       +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in2:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in3:                       +3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in5:                       +0.15 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in6:                       +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in7:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in8:                       +3.09 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in9:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in10:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in11:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in12:                      +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in13:                      +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in14:                      +0.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

fan1:                      564 RPM  (min =    0 RPM)

fan2:                      549 RPM  (min =    0 RPM)

fan3:                        0 RPM  (min =    0 RPM)

fan4:                        0 RPM  (min =    0 RPM)

fan5:                      718 RPM  (min =    0 RPM)

fan6:                        0 RPM

SYSTIN:                    +30.0°C  (high = +98.0°C, hyst = +95.0°C)  sensor = thermistor

CPUTIN:                    +30.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor

AUXTIN0:                   +30.5°C    sensor = thermistor

AUXTIN1:                   +30.0°C    sensor = thermistor

AUXTIN2:                   +30.0°C    sensor = thermistor

AUXTIN3:                   +93.0°C    sensor = thermistor

PECI Agent 0:              +29.0°C  (high = +98.0°C, hyst = +95.0°C)

                                    (crit = +100.0°C)

PECI Agent 0 Calibration:  +30.0°C  

PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  

PCH_CHIP_TEMP:              +0.0°C  

intrusion0:               ALARM

intrusion1:               ALARM

beep_enable:              disabled



acpitz-virtual-0

Adapter: Virtual device

temp1:        +27.8°C  (crit = +119.0°C)

temp2:        +29.8°C  (crit = +119.0°C)



asus-isa-0000

Adapter: ISA adapter

cpu_fan:        0 RPM



coretemp-isa-0000

Adapter: ISA adapter

Package id 0:  +37.0°C  (high = +80.0°C, crit = +100.0°C)

Core 0:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 1:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 2:        +29.0°C  (high = +80.0°C, crit = +100.0°C)

Core 3:        +37.0°C  (high = +80.0°C, crit = +100.0°C)

2 intake fans and one outtake fans are showing up as it should be.

any thoughts, why cpu temp/fan speed not showing up explicitly?

asked Nov 30 at 17:47

sevenfourk

1114

add a comment |

up vote
0
down vote

favorite

chipset I guess ought to be: Nuvoton NCT6793D

nct6793-isa-0290

Adapter: ISA adapter

in0:                       +0.34 V  (min =  +0.00 V, max =  +1.74 V)

in1:                       +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in2:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in3:                       +3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in5:                       +0.15 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in6:                       +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in7:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in8:                       +3.09 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in9:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in10:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in11:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in12:                      +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in13:                      +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in14:                      +0.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

fan1:                      564 RPM  (min =    0 RPM)

fan2:                      549 RPM  (min =    0 RPM)

fan3:                        0 RPM  (min =    0 RPM)

fan4:                        0 RPM  (min =    0 RPM)

fan5:                      718 RPM  (min =    0 RPM)

fan6:                        0 RPM

SYSTIN:                    +30.0°C  (high = +98.0°C, hyst = +95.0°C)  sensor = thermistor

CPUTIN:                    +30.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor

AUXTIN0:                   +30.5°C    sensor = thermistor

AUXTIN1:                   +30.0°C    sensor = thermistor

AUXTIN2:                   +30.0°C    sensor = thermistor

AUXTIN3:                   +93.0°C    sensor = thermistor

PECI Agent 0:              +29.0°C  (high = +98.0°C, hyst = +95.0°C)

                                    (crit = +100.0°C)

PECI Agent 0 Calibration:  +30.0°C  

PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  

PCH_CHIP_TEMP:              +0.0°C  

intrusion0:               ALARM

intrusion1:               ALARM

beep_enable:              disabled



acpitz-virtual-0

Adapter: Virtual device

temp1:        +27.8°C  (crit = +119.0°C)

temp2:        +29.8°C  (crit = +119.0°C)



asus-isa-0000

Adapter: ISA adapter

cpu_fan:        0 RPM



coretemp-isa-0000

Adapter: ISA adapter

Package id 0:  +37.0°C  (high = +80.0°C, crit = +100.0°C)

Core 0:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 1:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 2:        +29.0°C  (high = +80.0°C, crit = +100.0°C)

Core 3:        +37.0°C  (high = +80.0°C, crit = +100.0°C)

2 intake fans and one outtake fans are showing up as it should be.

any thoughts, why cpu temp/fan speed not showing up explicitly?

asked Nov 30 at 17:47

sevenfourk

1114

chipset I guess ought to be: Nuvoton NCT6793D

nct6793-isa-0290

Adapter: ISA adapter

in0:                       +0.34 V  (min =  +0.00 V, max =  +1.74 V)

in1:                       +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in2:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in3:                       +3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in5:                       +0.15 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in6:                       +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in7:                       +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in8:                       +3.09 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in9:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in10:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in11:                      +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in12:                      +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in13:                      +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

in14:                      +0.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

fan1:                      564 RPM  (min =    0 RPM)

fan2:                      549 RPM  (min =    0 RPM)

fan3:                        0 RPM  (min =    0 RPM)

fan4:                        0 RPM  (min =    0 RPM)

fan5:                      718 RPM  (min =    0 RPM)

fan6:                        0 RPM

SYSTIN:                    +30.0°C  (high = +98.0°C, hyst = +95.0°C)  sensor = thermistor

CPUTIN:                    +30.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor

AUXTIN0:                   +30.5°C    sensor = thermistor

AUXTIN1:                   +30.0°C    sensor = thermistor

AUXTIN2:                   +30.0°C    sensor = thermistor

AUXTIN3:                   +93.0°C    sensor = thermistor

PECI Agent 0:              +29.0°C  (high = +98.0°C, hyst = +95.0°C)

                                    (crit = +100.0°C)

PECI Agent 0 Calibration:  +30.0°C  

PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  

PCH_CHIP_TEMP:              +0.0°C  

intrusion0:               ALARM

intrusion1:               ALARM

beep_enable:              disabled



acpitz-virtual-0

Adapter: Virtual device

temp1:        +27.8°C  (crit = +119.0°C)

temp2:        +29.8°C  (crit = +119.0°C)



asus-isa-0000

Adapter: ISA adapter

cpu_fan:        0 RPM



coretemp-isa-0000

Adapter: ISA adapter

Package id 0:  +37.0°C  (high = +80.0°C, crit = +100.0°C)

Core 0:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 1:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

Core 2:        +29.0°C  (high = +80.0°C, crit = +100.0°C)

Core 3:        +37.0°C  (high = +80.0°C, crit = +100.0°C)

2 intake fans and one outtake fans are showing up as it should be.

any thoughts, why cpu temp/fan speed not showing up explicitly?

18.04 lm-sensors

asked Nov 30 at 17:47

sevenfourk

1114

asked Nov 30 at 17:47

sevenfourk

1114

asked Nov 30 at 17:47

sevenfourk

1114

asked Nov 30 at 17:47

sevenfourk

1114

asked Nov 30 at 17:47

sevenfourk

1114

add a comment |

active

oldest

votes

Your Answer

StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});

}
});

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1097477%2flm-sensors-not-showing-up-cpu-fan-speed-and-cpu-temp%23new-answer', 'question_page');
}
);

Post as a guest

Name

Required, but never shown

active

oldest

votes

draft saved

draft discarded

Thanks for contributing an answer to Ask Ubuntu!

Please be sure to answer the question. Provide details and share your research!

But avoid …

Asking for help, clarification, or responding to other answers.

Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

Some of your past answers have not been well-received, and you're in danger of being blocked from answering.

Please pay close attention to the following guidance:

Please be sure to answer the question. Provide details and share your research!

But avoid …

Asking for help, clarification, or responding to other answers.

Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Name

Required, but never shown

Name

Required, but never shown

This page is only for reference, If you need detailed information, please check here

搜尋此網誌

Bdtyktl