Windows 10 Home won't activate after clean reinstallation. Error 0x8007232B “DNS name does not exist”
up vote
1
down vote
favorite
I bought my laptop last summer, and it came with Windows 8.1. I did an upgrade to Windows 10 Home edition today with the ISO using the media creation tool, and it was activated.
I then did a clean install just to wipe everything clean because it's been a while. Afterwards, it was activated for a couple of hours, but now it's saying that it's not activated anymore. When I try to activate it, I always get Error code: 0x8007232B. Error Description: DNS name does not exist
I'm posting from the laptop so Internet works
Update: I plugged the laptop directly into the modem via Ethernet, and the error changed to Error code: 0x8007007B. Error description: The filename, directory name, or volume label syntax is incorrect
...
windows-activation windows-10-upgrade windows-10
add a comment |
up vote
1
down vote
favorite
I bought my laptop last summer, and it came with Windows 8.1. I did an upgrade to Windows 10 Home edition today with the ISO using the media creation tool, and it was activated.
I then did a clean install just to wipe everything clean because it's been a while. Afterwards, it was activated for a couple of hours, but now it's saying that it's not activated anymore. When I try to activate it, I always get Error code: 0x8007232B. Error Description: DNS name does not exist
I'm posting from the laptop so Internet works
Update: I plugged the laptop directly into the modem via Ethernet, and the error changed to Error code: 0x8007007B. Error description: The filename, directory name, or volume label syntax is incorrect
...
windows-activation windows-10-upgrade windows-10
Well, first things first: is your Internet connection working? Can you browse the web, ping hosts by name, etc. from the affected system?
– a CVn
Jul 30 '15 at 8:02
Yes the internet works. I'm posting from the laptop
– Alex
Jul 30 '15 at 8:08
Please edit your question to make that clear, then.
– a CVn
Jul 30 '15 at 8:10
I should point out that Microsoft's activation servers are having lots of troubles. So unless you have other problems with the internet, it likely, isn't you.
– Ramhound
Jul 30 '15 at 21:21
It worked on my desktop 3 times no problems. It still wouldn't work today on my laptop, until after I reinstalled. I tried right before I reinstalled too
– Alex
Jul 30 '15 at 22:10
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I bought my laptop last summer, and it came with Windows 8.1. I did an upgrade to Windows 10 Home edition today with the ISO using the media creation tool, and it was activated.
I then did a clean install just to wipe everything clean because it's been a while. Afterwards, it was activated for a couple of hours, but now it's saying that it's not activated anymore. When I try to activate it, I always get Error code: 0x8007232B. Error Description: DNS name does not exist
I'm posting from the laptop so Internet works
Update: I plugged the laptop directly into the modem via Ethernet, and the error changed to Error code: 0x8007007B. Error description: The filename, directory name, or volume label syntax is incorrect
...
windows-activation windows-10-upgrade windows-10
I bought my laptop last summer, and it came with Windows 8.1. I did an upgrade to Windows 10 Home edition today with the ISO using the media creation tool, and it was activated.
I then did a clean install just to wipe everything clean because it's been a while. Afterwards, it was activated for a couple of hours, but now it's saying that it's not activated anymore. When I try to activate it, I always get Error code: 0x8007232B. Error Description: DNS name does not exist
I'm posting from the laptop so Internet works
Update: I plugged the laptop directly into the modem via Ethernet, and the error changed to Error code: 0x8007007B. Error description: The filename, directory name, or volume label syntax is incorrect
...
windows-activation windows-10-upgrade windows-10
windows-activation windows-10-upgrade windows-10
edited Jul 30 '15 at 8:11
asked Jul 30 '15 at 7:54
Alex
71231328
71231328
Well, first things first: is your Internet connection working? Can you browse the web, ping hosts by name, etc. from the affected system?
– a CVn
Jul 30 '15 at 8:02
Yes the internet works. I'm posting from the laptop
– Alex
Jul 30 '15 at 8:08
Please edit your question to make that clear, then.
– a CVn
Jul 30 '15 at 8:10
I should point out that Microsoft's activation servers are having lots of troubles. So unless you have other problems with the internet, it likely, isn't you.
– Ramhound
Jul 30 '15 at 21:21
It worked on my desktop 3 times no problems. It still wouldn't work today on my laptop, until after I reinstalled. I tried right before I reinstalled too
– Alex
Jul 30 '15 at 22:10
add a comment |
Well, first things first: is your Internet connection working? Can you browse the web, ping hosts by name, etc. from the affected system?
– a CVn
Jul 30 '15 at 8:02
Yes the internet works. I'm posting from the laptop
– Alex
Jul 30 '15 at 8:08
Please edit your question to make that clear, then.
– a CVn
Jul 30 '15 at 8:10
I should point out that Microsoft's activation servers are having lots of troubles. So unless you have other problems with the internet, it likely, isn't you.
– Ramhound
Jul 30 '15 at 21:21
It worked on my desktop 3 times no problems. It still wouldn't work today on my laptop, until after I reinstalled. I tried right before I reinstalled too
– Alex
Jul 30 '15 at 22:10
Well, first things first: is your Internet connection working? Can you browse the web, ping hosts by name, etc. from the affected system?
– a CVn
Jul 30 '15 at 8:02
Well, first things first: is your Internet connection working? Can you browse the web, ping hosts by name, etc. from the affected system?
– a CVn
Jul 30 '15 at 8:02
Yes the internet works. I'm posting from the laptop
– Alex
Jul 30 '15 at 8:08
Yes the internet works. I'm posting from the laptop
– Alex
Jul 30 '15 at 8:08
Please edit your question to make that clear, then.
– a CVn
Jul 30 '15 at 8:10
Please edit your question to make that clear, then.
– a CVn
Jul 30 '15 at 8:10
I should point out that Microsoft's activation servers are having lots of troubles. So unless you have other problems with the internet, it likely, isn't you.
– Ramhound
Jul 30 '15 at 21:21
I should point out that Microsoft's activation servers are having lots of troubles. So unless you have other problems with the internet, it likely, isn't you.
– Ramhound
Jul 30 '15 at 21:21
It worked on my desktop 3 times no problems. It still wouldn't work today on my laptop, until after I reinstalled. I tried right before I reinstalled too
– Alex
Jul 30 '15 at 22:10
It worked on my desktop 3 times no problems. It still wouldn't work today on my laptop, until after I reinstalled. I tried right before I reinstalled too
– Alex
Jul 30 '15 at 22:10
add a comment |
2 Answers
2
active
oldest
votes
up vote
0
down vote
Ended up just doing a clean reinstall because I found out I installed Windows in BIOS mode instead of UEFI. Fixed everything, but I still don't know what caused it to begin with...
add a comment |
up vote
-1
down vote
I'm guessing somehow your DNS settings got removed/changed.
Run a Command Prompt as Administrator (windows key -> "command prompt" -> right click -> Run As Administrator).
Then type in:
netsh interface ip set dns "Wi-Fi" static 8.8.8.8
If you use Wi-Fi. If you are wired, do:
netsh interface ip set dns "Local Area Connection" static 8.8.8.8
That will set your DNS server to Google's public DNS servers.
Changed DNS to 8.8.8.8 and 8.8.4.4 in the IPv4 settings of the wireless adapter, and it still says the same thing
– Alex
Jul 30 '15 at 8:09
Note that OP clarified (just after you posted your answer, so I'm not downvoting) in a comment that the Internet connection is working fine.
– a CVn
Jul 30 '15 at 8:11
add a comment |
protected by Community♦ May 15 '16 at 19:52
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Ended up just doing a clean reinstall because I found out I installed Windows in BIOS mode instead of UEFI. Fixed everything, but I still don't know what caused it to begin with...
add a comment |
up vote
0
down vote
Ended up just doing a clean reinstall because I found out I installed Windows in BIOS mode instead of UEFI. Fixed everything, but I still don't know what caused it to begin with...
add a comment |
up vote
0
down vote
up vote
0
down vote
Ended up just doing a clean reinstall because I found out I installed Windows in BIOS mode instead of UEFI. Fixed everything, but I still don't know what caused it to begin with...
Ended up just doing a clean reinstall because I found out I installed Windows in BIOS mode instead of UEFI. Fixed everything, but I still don't know what caused it to begin with...
answered Jul 30 '15 at 19:04
Alex
71231328
71231328
add a comment |
add a comment |
up vote
-1
down vote
I'm guessing somehow your DNS settings got removed/changed.
Run a Command Prompt as Administrator (windows key -> "command prompt" -> right click -> Run As Administrator).
Then type in:
netsh interface ip set dns "Wi-Fi" static 8.8.8.8
If you use Wi-Fi. If you are wired, do:
netsh interface ip set dns "Local Area Connection" static 8.8.8.8
That will set your DNS server to Google's public DNS servers.
Changed DNS to 8.8.8.8 and 8.8.4.4 in the IPv4 settings of the wireless adapter, and it still says the same thing
– Alex
Jul 30 '15 at 8:09
Note that OP clarified (just after you posted your answer, so I'm not downvoting) in a comment that the Internet connection is working fine.
– a CVn
Jul 30 '15 at 8:11
add a comment |
up vote
-1
down vote
I'm guessing somehow your DNS settings got removed/changed.
Run a Command Prompt as Administrator (windows key -> "command prompt" -> right click -> Run As Administrator).
Then type in:
netsh interface ip set dns "Wi-Fi" static 8.8.8.8
If you use Wi-Fi. If you are wired, do:
netsh interface ip set dns "Local Area Connection" static 8.8.8.8
That will set your DNS server to Google's public DNS servers.
Changed DNS to 8.8.8.8 and 8.8.4.4 in the IPv4 settings of the wireless adapter, and it still says the same thing
– Alex
Jul 30 '15 at 8:09
Note that OP clarified (just after you posted your answer, so I'm not downvoting) in a comment that the Internet connection is working fine.
– a CVn
Jul 30 '15 at 8:11
add a comment |
up vote
-1
down vote
up vote
-1
down vote
I'm guessing somehow your DNS settings got removed/changed.
Run a Command Prompt as Administrator (windows key -> "command prompt" -> right click -> Run As Administrator).
Then type in:
netsh interface ip set dns "Wi-Fi" static 8.8.8.8
If you use Wi-Fi. If you are wired, do:
netsh interface ip set dns "Local Area Connection" static 8.8.8.8
That will set your DNS server to Google's public DNS servers.
I'm guessing somehow your DNS settings got removed/changed.
Run a Command Prompt as Administrator (windows key -> "command prompt" -> right click -> Run As Administrator).
Then type in:
netsh interface ip set dns "Wi-Fi" static 8.8.8.8
If you use Wi-Fi. If you are wired, do:
netsh interface ip set dns "Local Area Connection" static 8.8.8.8
That will set your DNS server to Google's public DNS servers.
answered Jul 30 '15 at 8:05
Dee Eff
1446
1446
Changed DNS to 8.8.8.8 and 8.8.4.4 in the IPv4 settings of the wireless adapter, and it still says the same thing
– Alex
Jul 30 '15 at 8:09
Note that OP clarified (just after you posted your answer, so I'm not downvoting) in a comment that the Internet connection is working fine.
– a CVn
Jul 30 '15 at 8:11
add a comment |
Changed DNS to 8.8.8.8 and 8.8.4.4 in the IPv4 settings of the wireless adapter, and it still says the same thing
– Alex
Jul 30 '15 at 8:09
Note that OP clarified (just after you posted your answer, so I'm not downvoting) in a comment that the Internet connection is working fine.
– a CVn
Jul 30 '15 at 8:11
Changed DNS to 8.8.8.8 and 8.8.4.4 in the IPv4 settings of the wireless adapter, and it still says the same thing
– Alex
Jul 30 '15 at 8:09
Changed DNS to 8.8.8.8 and 8.8.4.4 in the IPv4 settings of the wireless adapter, and it still says the same thing
– Alex
Jul 30 '15 at 8:09
Note that OP clarified (just after you posted your answer, so I'm not downvoting) in a comment that the Internet connection is working fine.
– a CVn
Jul 30 '15 at 8:11
Note that OP clarified (just after you posted your answer, so I'm not downvoting) in a comment that the Internet connection is working fine.
– a CVn
Jul 30 '15 at 8:11
add a comment |
protected by Community♦ May 15 '16 at 19:52
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
Well, first things first: is your Internet connection working? Can you browse the web, ping hosts by name, etc. from the affected system?
– a CVn
Jul 30 '15 at 8:02
Yes the internet works. I'm posting from the laptop
– Alex
Jul 30 '15 at 8:08
Please edit your question to make that clear, then.
– a CVn
Jul 30 '15 at 8:10
I should point out that Microsoft's activation servers are having lots of troubles. So unless you have other problems with the internet, it likely, isn't you.
– Ramhound
Jul 30 '15 at 21:21
It worked on my desktop 3 times no problems. It still wouldn't work today on my laptop, until after I reinstalled. I tried right before I reinstalled too
– Alex
Jul 30 '15 at 22:10