Has this rim strip expired?
up vote
7
down vote
favorite
I have 2 unused rim strips. Along the edges and on the surface there are brown marks (patches, streaks, blotches).
2 images (I cannot improve the resolution)
Observations
- Both strips were stored hanging vertically (i.e. not folded nor rolled up).
- When I place the 2 strips over each other, I see that the edge marks overlap, i.e. the strips have the same brown edge marks in the same positions.
- Overall the rim strip is smooth. The material is not brittle. There are no scratches nor nicks.
- Seems like the brown color has steeped into the plastic.
- The size written on the rim tape: 32 559
- There is a number which looks like a manufacture date: 06/05
- Manufacturer: Schwalbe
Questions
- Is this rim strip beyond its use-by-date, i.e. if I use it will it need to be replaced soon?
- Perhaps an alternative question: what does a rim strip look like when it is in need of replacement?
mountain-bike rims rim-tape
asked Nov 29 at 7:45
user53784
24529
add a comment |
up vote
7
down vote
favorite
I have 2 unused rim strips. Along the edges and on the surface there are brown marks (patches, streaks, blotches).
2 images (I cannot improve the resolution)
Observations
- Both strips were stored hanging vertically (i.e. not folded nor rolled up).
- When I place the 2 strips over each other, I see that the edge marks overlap, i.e. the strips have the same brown edge marks in the same positions.
- Overall the rim strip is smooth. The material is not brittle. There are no scratches nor nicks.
- Seems like the brown color has steeped into the plastic.
- The size written on the rim tape: 32 559
- There is a number which looks like a manufacture date: 06/05
- Manufacturer: Schwalbe
Questions
- Is this rim strip beyond its use-by-date, i.e. if I use it will it need to be replaced soon?
- Perhaps an alternative question: what does a rim strip look like when it is in need of replacement?
mountain-bike rims rim-tape
asked Nov 29 at 7:45
user53784
24529
1
In addition to ojs' excellent answer: Mountain-bike tires have very little pressure in their tires, so there's not much force on the rim strip. I.e. no need to worry...
– cmaster
Nov 29 at 9:28
1
It should sit tight and you ought to need some force to get it into the rim.
– Carel
Nov 29 at 15:24
add a comment |
up vote
7
down vote
favorite
up vote
7
down vote
favorite
I have 2 unused rim strips. Along the edges and on the surface there are brown marks (patches, streaks, blotches).
2 images (I cannot improve the resolution)
Observations
- Both strips were stored hanging vertically (i.e. not folded nor rolled up).
- When I place the 2 strips over each other, I see that the edge marks overlap, i.e. the strips have the same brown edge marks in the same positions.
- Overall the rim strip is smooth. The material is not brittle. There are no scratches nor nicks.
- Seems like the brown color has steeped into the plastic.
- The size written on the rim tape: 32 559
- There is a number which looks like a manufacture date: 06/05
- Manufacturer: Schwalbe
Questions
- Is this rim strip beyond its use-by-date, i.e. if I use it will it need to be replaced soon?
- Perhaps an alternative question: what does a rim strip look like when it is in need of replacement?
mountain-bike rims rim-tape
asked Nov 29 at 7:45
user53784
24529
I have 2 unused rim strips. Along the edges and on the surface there are brown marks (patches, streaks, blotches).
2 images (I cannot improve the resolution)
Observations
- Both strips were stored hanging vertically (i.e. not folded nor rolled up).
- When I place the 2 strips over each other, I see that the edge marks overlap, i.e. the strips have the same brown edge marks in the same positions.
- Overall the rim strip is smooth. The material is not brittle. There are no scratches nor nicks.
- Seems like the brown color has steeped into the plastic.
- The size written on the rim tape: 32 559
- There is a number which looks like a manufacture date: 06/05
- Manufacturer: Schwalbe
Questions
- Is this rim strip beyond its use-by-date, i.e. if I use it will it need to be replaced soon?
- Perhaps an alternative question: what does a rim strip look like when it is in need of replacement?
mountain-bike rims rim-tape
mountain-bike rims rim-tape
asked Nov 29 at 7:45
user53784
24529
asked Nov 29 at 7:45
user53784
24529
edited Nov 29 at 12:25
asked Nov 29 at 7:45
user53784
24529
asked Nov 29 at 7:45
user53784
24529
asked Nov 29 at 7:45
user53784
24529
24529
1
In addition to ojs' excellent answer: Mountain-bike tires have very little pressure in their tires, so there's not much force on the rim strip. I.e. no need to worry...
– cmaster
Nov 29 at 9:28
1
It should sit tight and you ought to need some force to get it into the rim.
– Carel
Nov 29 at 15:24
add a comment |
1
In addition to ojs' excellent answer: Mountain-bike tires have very little pressure in their tires, so there's not much force on the rim strip. I.e. no need to worry...
– cmaster
Nov 29 at 9:28
1
It should sit tight and you ought to need some force to get it into the rim.
– Carel
Nov 29 at 15:24
1
1
In addition to ojs' excellent answer: Mountain-bike tires have very little pressure in their tires, so there's not much force on the rim strip. I.e. no need to worry...
– cmaster
Nov 29 at 9:28
In addition to ojs' excellent answer: Mountain-bike tires have very little pressure in their tires, so there's not much force on the rim strip. I.e. no need to worry...
– cmaster
Nov 29 at 9:28
1
1
It should sit tight and you ought to need some force to get it into the rim.
– Carel
Nov 29 at 15:24
It should sit tight and you ought to need some force to get it into the rim.
– Carel
Nov 29 at 15:24
add a comment |
2 Answers
2
active
oldest
votes
up vote
14
down vote
accepted
This particular rim strip absorbs color from everything, and it is not a problem. Mine have turned green in use from something leaching from tubes.
In general, rim strip should be replaced if it splits, stretches deep into the spoke holes or exposes the spoke holes. Discoloration happens, but since rim strips aren't usually visible this is not much a problem.
answered Nov 29 at 8:08
ojs
11.2k22040
add a comment |
up vote
2
down vote
The rim strip prevents some dirt and moisture from sneaking into the wheel through the spoke holes and the spokes from rubbing/puncturing the tire or the tube's inflation pushing into the spoke hole (which can be rough or a bit sharp)
I would never go to the bike store and buy a new rim strip; I might keep one in good shape from a destroyed wheel but with a lot of wheels going tubeless you need a rim strip less and less.
If you're at all concerned just run a strip of electrical tape around the rim and you are good to go. If you're a roadie (with their obsessive weight considerations) just run a very thin strip of tape over only the spoke holes.
You could make a case that dirt and grime inside the tire will wear the tube, but I'd suspect that's a pretty minor impact compared to what it does to the rest of your bike... Yours look perfectly adequate.
answered Nov 29 at 18:15
markd
50349
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
14
down vote
accepted
This particular rim strip absorbs color from everything, and it is not a problem. Mine have turned green in use from something leaching from tubes.
In general, rim strip should be replaced if it splits, stretches deep into the spoke holes or exposes the spoke holes. Discoloration happens, but since rim strips aren't usually visible this is not much a problem.
answered Nov 29 at 8:08
ojs
11.2k22040
add a comment |
up vote
14
down vote
accepted
This particular rim strip absorbs color from everything, and it is not a problem. Mine have turned green in use from something leaching from tubes.
In general, rim strip should be replaced if it splits, stretches deep into the spoke holes or exposes the spoke holes. Discoloration happens, but since rim strips aren't usually visible this is not much a problem.
answered Nov 29 at 8:08
ojs
11.2k22040
add a comment |
up vote
14
down vote
accepted
up vote
14
down vote
accepted
This particular rim strip absorbs color from everything, and it is not a problem. Mine have turned green in use from something leaching from tubes.
In general, rim strip should be replaced if it splits, stretches deep into the spoke holes or exposes the spoke holes. Discoloration happens, but since rim strips aren't usually visible this is not much a problem.
answered Nov 29 at 8:08
ojs
11.2k22040
This particular rim strip absorbs color from everything, and it is not a problem. Mine have turned green in use from something leaching from tubes.
In general, rim strip should be replaced if it splits, stretches deep into the spoke holes or exposes the spoke holes. Discoloration happens, but since rim strips aren't usually visible this is not much a problem.
answered Nov 29 at 8:08
ojs
11.2k22040
answered Nov 29 at 8:08
ojs
11.2k22040
answered Nov 29 at 8:08
ojs
11.2k22040
answered Nov 29 at 8:08
ojs
11.2k22040
11.2k22040
add a comment |
add a comment |
up vote
2
down vote
The rim strip prevents some dirt and moisture from sneaking into the wheel through the spoke holes and the spokes from rubbing/puncturing the tire or the tube's inflation pushing into the spoke hole (which can be rough or a bit sharp)
I would never go to the bike store and buy a new rim strip; I might keep one in good shape from a destroyed wheel but with a lot of wheels going tubeless you need a rim strip less and less.
If you're at all concerned just run a strip of electrical tape around the rim and you are good to go. If you're a roadie (with their obsessive weight considerations) just run a very thin strip of tape over only the spoke holes.
You could make a case that dirt and grime inside the tire will wear the tube, but I'd suspect that's a pretty minor impact compared to what it does to the rest of your bike... Yours look perfectly adequate.
answered Nov 29 at 18:15
markd
50349
add a comment |
up vote
2
down vote
The rim strip prevents some dirt and moisture from sneaking into the wheel through the spoke holes and the spokes from rubbing/puncturing the tire or the tube's inflation pushing into the spoke hole (which can be rough or a bit sharp)
I would never go to the bike store and buy a new rim strip; I might keep one in good shape from a destroyed wheel but with a lot of wheels going tubeless you need a rim strip less and less.
If you're at all concerned just run a strip of electrical tape around the rim and you are good to go. If you're a roadie (with their obsessive weight considerations) just run a very thin strip of tape over only the spoke holes.
You could make a case that dirt and grime inside the tire will wear the tube, but I'd suspect that's a pretty minor impact compared to what it does to the rest of your bike... Yours look perfectly adequate.
answered Nov 29 at 18:15
markd
50349
add a comment |
up vote
2
down vote
up vote
2
down vote
The rim strip prevents some dirt and moisture from sneaking into the wheel through the spoke holes and the spokes from rubbing/puncturing the tire or the tube's inflation pushing into the spoke hole (which can be rough or a bit sharp)
I would never go to the bike store and buy a new rim strip; I might keep one in good shape from a destroyed wheel but with a lot of wheels going tubeless you need a rim strip less and less.
If you're at all concerned just run a strip of electrical tape around the rim and you are good to go. If you're a roadie (with their obsessive weight considerations) just run a very thin strip of tape over only the spoke holes.
You could make a case that dirt and grime inside the tire will wear the tube, but I'd suspect that's a pretty minor impact compared to what it does to the rest of your bike... Yours look perfectly adequate.
answered Nov 29 at 18:15
markd
50349
The rim strip prevents some dirt and moisture from sneaking into the wheel through the spoke holes and the spokes from rubbing/puncturing the tire or the tube's inflation pushing into the spoke hole (which can be rough or a bit sharp)
I would never go to the bike store and buy a new rim strip; I might keep one in good shape from a destroyed wheel but with a lot of wheels going tubeless you need a rim strip less and less.
If you're at all concerned just run a strip of electrical tape around the rim and you are good to go. If you're a roadie (with their obsessive weight considerations) just run a very thin strip of tape over only the spoke holes.
You could make a case that dirt and grime inside the tire will wear the tube, but I'd suspect that's a pretty minor impact compared to what it does to the rest of your bike... Yours look perfectly adequate.
answered Nov 29 at 18:15
markd
50349
answered Nov 29 at 18:15
markd
50349
answered Nov 29 at 18:15
markd
50349
answered Nov 29 at 18:15
markd
50349
50349
add a comment |
add a comment |
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58314%2fhas-this-rim-strip-expired%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
In addition to ojs' excellent answer: Mountain-bike tires have very little pressure in their tires, so there's not much force on the rim strip. I.e. no need to worry...
– cmaster
Nov 29 at 9:28
1
It should sit tight and you ought to need some force to get it into the rim.
– Carel
Nov 29 at 15:24