Bdtyktl

My processor does not runs at its full clock speed on Ubuntu, I also tried it on Arch Distros like Manjaro and faced the same issue.
Below are the details of my system and what I have tried till now.

I installed Ubuntu 18.04

4.15.0-43-generic alongside of Windows 10 Home on

Acer Swift 3 SF315-41

The Max CPU speed and other beginner details are as follows:

Architecture:        x86_64

CPU op-mode(s):      32-bit, 64-bit

Byte Order:          Little Endian

CPU(s):              8

On-line CPU(s) list: 0-7

Thread(s) per core:  2

Core(s) per socket:  4

Socket(s):           1

NUMA node(s):        1

Vendor ID:           AuthenticAMD

CPU family:          23

Model:               17

Model name:          AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx

Stepping:            0

CPU MHz:             1574.846

CPU max MHz:         2000.0000

CPU min MHz:         1600.0000

BogoMIPS:            3992.66

Virtualization:      AMD-V

L1d cache:           32K

L1i cache:           64K

L2 cache:            512K

L3 cache:            4096K

NUMA node0 CPU(s):   0-7

Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx hw_pstate sme ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca

However in windows the max processor speed is 3.6GHz

This max speed is also possible in Ubuntu as:

$ dmidecode -t processor | grep Speed

    Max Speed: 3600 MHz

    Current Speed: 2000 MHz

Also is there any chance that the AMD microcode is not loaded in the init? If so, then how to solve this?

Any approach towards the problem or alternate solution would be helpful.

Turns out that loading the AMD-Microcode on init resolves this problem.
We just need to edit the /etc/default/amd64-microcode file to load the microcode early.

sudo aptitude install amd64-microcode

echo "AMD64UCODE_INITRAMFS=early" | sudo tee -a /etc/default/amd64-microcode

sudo update-initramfs

Note that the lscpu | grep 'MHz' would still show the max frequency as 2.00 GHz but you can speed test by openssl speed and see the current clock speeds boost up.

I found this answer on the internet

sudo apt-get remove --auto-remove amd64-microcode

whether that will actually work I dont know

actually I just tried it and it works