Fan is always on on my asus rog
I have an Asus Rog-GL553Vd laptop with Ubuntu 18.04. However, the fan is always on. It's really loud and it's annoying. My CPU usage is around 2-5%.
Please someone do me a favor to solve this problem ..
asus fan
|
show 2 more comments
I have an Asus Rog-GL553Vd laptop with Ubuntu 18.04. However, the fan is always on. It's really loud and it's annoying. My CPU usage is around 2-5%.
Please someone do me a favor to solve this problem ..
asus fan
2
Favor granted: welcome to the fun filled adventure of linux, take apart your computer and clean the dust out of the heat sink, dust is clogging the heat so it can't escape causing your fan to try to put out a fire, but it can't with a wall in the way
– hello moto
Aug 4 '18 at 6:26
But when i use windows i donot face that problem..
– Dipto Mondal
Aug 8 '18 at 19:17
Have you used: top to determine what processes are using near 100 percent to keep the fan high, most common problems are a minconfigured USB port, start unplugging stuff to see when it drops or webcontent without acceleration enabled on your browser.
– hello moto
Aug 8 '18 at 19:50
I face that problem even when i don't use any app...
– Dipto Mondal
Aug 8 '18 at 20:19
can we see the output of: watch "ps aux | sort -nrk 3,3 | head -n 10"
– hello moto
Aug 8 '18 at 20:22
|
show 2 more comments
I have an Asus Rog-GL553Vd laptop with Ubuntu 18.04. However, the fan is always on. It's really loud and it's annoying. My CPU usage is around 2-5%.
Please someone do me a favor to solve this problem ..
asus fan
I have an Asus Rog-GL553Vd laptop with Ubuntu 18.04. However, the fan is always on. It's really loud and it's annoying. My CPU usage is around 2-5%.
Please someone do me a favor to solve this problem ..
asus fan
asus fan
asked Aug 4 '18 at 5:58
Dipto MondalDipto Mondal
134
134
2
Favor granted: welcome to the fun filled adventure of linux, take apart your computer and clean the dust out of the heat sink, dust is clogging the heat so it can't escape causing your fan to try to put out a fire, but it can't with a wall in the way
– hello moto
Aug 4 '18 at 6:26
But when i use windows i donot face that problem..
– Dipto Mondal
Aug 8 '18 at 19:17
Have you used: top to determine what processes are using near 100 percent to keep the fan high, most common problems are a minconfigured USB port, start unplugging stuff to see when it drops or webcontent without acceleration enabled on your browser.
– hello moto
Aug 8 '18 at 19:50
I face that problem even when i don't use any app...
– Dipto Mondal
Aug 8 '18 at 20:19
can we see the output of: watch "ps aux | sort -nrk 3,3 | head -n 10"
– hello moto
Aug 8 '18 at 20:22
|
show 2 more comments
2
Favor granted: welcome to the fun filled adventure of linux, take apart your computer and clean the dust out of the heat sink, dust is clogging the heat so it can't escape causing your fan to try to put out a fire, but it can't with a wall in the way
– hello moto
Aug 4 '18 at 6:26
But when i use windows i donot face that problem..
– Dipto Mondal
Aug 8 '18 at 19:17
Have you used: top to determine what processes are using near 100 percent to keep the fan high, most common problems are a minconfigured USB port, start unplugging stuff to see when it drops or webcontent without acceleration enabled on your browser.
– hello moto
Aug 8 '18 at 19:50
I face that problem even when i don't use any app...
– Dipto Mondal
Aug 8 '18 at 20:19
can we see the output of: watch "ps aux | sort -nrk 3,3 | head -n 10"
– hello moto
Aug 8 '18 at 20:22
2
2
Favor granted: welcome to the fun filled adventure of linux, take apart your computer and clean the dust out of the heat sink, dust is clogging the heat so it can't escape causing your fan to try to put out a fire, but it can't with a wall in the way
– hello moto
Aug 4 '18 at 6:26
Favor granted: welcome to the fun filled adventure of linux, take apart your computer and clean the dust out of the heat sink, dust is clogging the heat so it can't escape causing your fan to try to put out a fire, but it can't with a wall in the way
– hello moto
Aug 4 '18 at 6:26
But when i use windows i donot face that problem..
– Dipto Mondal
Aug 8 '18 at 19:17
But when i use windows i donot face that problem..
– Dipto Mondal
Aug 8 '18 at 19:17
Have you used: top to determine what processes are using near 100 percent to keep the fan high, most common problems are a minconfigured USB port, start unplugging stuff to see when it drops or webcontent without acceleration enabled on your browser.
– hello moto
Aug 8 '18 at 19:50
Have you used: top to determine what processes are using near 100 percent to keep the fan high, most common problems are a minconfigured USB port, start unplugging stuff to see when it drops or webcontent without acceleration enabled on your browser.
– hello moto
Aug 8 '18 at 19:50
I face that problem even when i don't use any app...
– Dipto Mondal
Aug 8 '18 at 20:19
I face that problem even when i don't use any app...
– Dipto Mondal
Aug 8 '18 at 20:19
can we see the output of: watch "ps aux | sort -nrk 3,3 | head -n 10"
– hello moto
Aug 8 '18 at 20:22
can we see the output of: watch "ps aux | sort -nrk 3,3 | head -n 10"
– hello moto
Aug 8 '18 at 20:22
|
show 2 more comments
2 Answers
2
active
oldest
votes
I've tried this one and it helps a bit. LMT
Laptop Mode Tools controls the “laptop mode” feature of the Linux kernel. It saves power by spinning down hard drives, and in addition, it can be configured to tweak all sorts of other power-related things.
You have to remore TLP if you count on using this.
sudo add-apt-repository ppa:ubuntuhandbook1/apps
sudo apt update
sudo apt install laptop-mode-tools
You can use the .deb packages directly from this link
You then lunch it this this command and restart :
gksu lmt-config-gui
O my god this is working...Thanx man..
– Dipto Mondal
Feb 12 at 19:06
add a comment |
If you have not installed any of the power management services in Ubuntu, you may find these to be helpful:
First, install Tlp, Thermald, and Lmsensors to create power sensing and management. From the terminal:
sudo apt install tlp thermald
sudo apt install --install-suggests lm-sensors psensor
There are configuration files for Tlp located in /etc/default/tlp which you can customize to fit your needs. You can issue sudo tlp start
to start the process, but I would reboot.
Secondly, there are a set of utilities to set the fan speeds for various sensed temperatures. The following is quoted from https://www.neowin.net/forum/topic/1165469-control-fan-speeds-lm_sensors-isnt-working/?tab=comments#comment-595825859
sudo apt-get install lm-sensors
sudo sensors-detect
just follow the prompts. Add the recommended lines to /etc/modules.
Now, if you don't want to reboot, you'll have to manually activate the
modules.
sudo modprobe module1 module2
where module1 etc. = the module names provided from sensors-detect.
Next, you need to create your fancontrol file. The easiest way is to
run pwmconfig.
sudo pwmconfig
and work your way through the instructions there.
Finally, run sensors -s to make your fan configuration take effect.
sudo sensors -s
Now, you can check your temps.
sensors
Now to run fan control, type:
sudo /usr/sbin/fancontrol &
A nice way to visually inspect temps is with gkrellm. To get it:
sudo apt-get install gkrellm
pwmconfig gives me "There are no PWM outputs"
– Dipto Mondal
Feb 22 at 19:14
And the sensors command gives me this "cpu_fan: 0 RPM"
– Dipto Mondal
Feb 22 at 19:15
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1062210%2ffan-is-always-on-on-my-asus-rog%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I've tried this one and it helps a bit. LMT
Laptop Mode Tools controls the “laptop mode” feature of the Linux kernel. It saves power by spinning down hard drives, and in addition, it can be configured to tweak all sorts of other power-related things.
You have to remore TLP if you count on using this.
sudo add-apt-repository ppa:ubuntuhandbook1/apps
sudo apt update
sudo apt install laptop-mode-tools
You can use the .deb packages directly from this link
You then lunch it this this command and restart :
gksu lmt-config-gui
O my god this is working...Thanx man..
– Dipto Mondal
Feb 12 at 19:06
add a comment |
I've tried this one and it helps a bit. LMT
Laptop Mode Tools controls the “laptop mode” feature of the Linux kernel. It saves power by spinning down hard drives, and in addition, it can be configured to tweak all sorts of other power-related things.
You have to remore TLP if you count on using this.
sudo add-apt-repository ppa:ubuntuhandbook1/apps
sudo apt update
sudo apt install laptop-mode-tools
You can use the .deb packages directly from this link
You then lunch it this this command and restart :
gksu lmt-config-gui
O my god this is working...Thanx man..
– Dipto Mondal
Feb 12 at 19:06
add a comment |
I've tried this one and it helps a bit. LMT
Laptop Mode Tools controls the “laptop mode” feature of the Linux kernel. It saves power by spinning down hard drives, and in addition, it can be configured to tweak all sorts of other power-related things.
You have to remore TLP if you count on using this.
sudo add-apt-repository ppa:ubuntuhandbook1/apps
sudo apt update
sudo apt install laptop-mode-tools
You can use the .deb packages directly from this link
You then lunch it this this command and restart :
gksu lmt-config-gui
I've tried this one and it helps a bit. LMT
Laptop Mode Tools controls the “laptop mode” feature of the Linux kernel. It saves power by spinning down hard drives, and in addition, it can be configured to tweak all sorts of other power-related things.
You have to remore TLP if you count on using this.
sudo add-apt-repository ppa:ubuntuhandbook1/apps
sudo apt update
sudo apt install laptop-mode-tools
You can use the .deb packages directly from this link
You then lunch it this this command and restart :
gksu lmt-config-gui
edited Feb 12 at 18:34
answered Feb 12 at 14:22
VolshebnikVolshebnik
343
343
O my god this is working...Thanx man..
– Dipto Mondal
Feb 12 at 19:06
add a comment |
O my god this is working...Thanx man..
– Dipto Mondal
Feb 12 at 19:06
O my god this is working...Thanx man..
– Dipto Mondal
Feb 12 at 19:06
O my god this is working...Thanx man..
– Dipto Mondal
Feb 12 at 19:06
add a comment |
If you have not installed any of the power management services in Ubuntu, you may find these to be helpful:
First, install Tlp, Thermald, and Lmsensors to create power sensing and management. From the terminal:
sudo apt install tlp thermald
sudo apt install --install-suggests lm-sensors psensor
There are configuration files for Tlp located in /etc/default/tlp which you can customize to fit your needs. You can issue sudo tlp start
to start the process, but I would reboot.
Secondly, there are a set of utilities to set the fan speeds for various sensed temperatures. The following is quoted from https://www.neowin.net/forum/topic/1165469-control-fan-speeds-lm_sensors-isnt-working/?tab=comments#comment-595825859
sudo apt-get install lm-sensors
sudo sensors-detect
just follow the prompts. Add the recommended lines to /etc/modules.
Now, if you don't want to reboot, you'll have to manually activate the
modules.
sudo modprobe module1 module2
where module1 etc. = the module names provided from sensors-detect.
Next, you need to create your fancontrol file. The easiest way is to
run pwmconfig.
sudo pwmconfig
and work your way through the instructions there.
Finally, run sensors -s to make your fan configuration take effect.
sudo sensors -s
Now, you can check your temps.
sensors
Now to run fan control, type:
sudo /usr/sbin/fancontrol &
A nice way to visually inspect temps is with gkrellm. To get it:
sudo apt-get install gkrellm
pwmconfig gives me "There are no PWM outputs"
– Dipto Mondal
Feb 22 at 19:14
And the sensors command gives me this "cpu_fan: 0 RPM"
– Dipto Mondal
Feb 22 at 19:15
add a comment |
If you have not installed any of the power management services in Ubuntu, you may find these to be helpful:
First, install Tlp, Thermald, and Lmsensors to create power sensing and management. From the terminal:
sudo apt install tlp thermald
sudo apt install --install-suggests lm-sensors psensor
There are configuration files for Tlp located in /etc/default/tlp which you can customize to fit your needs. You can issue sudo tlp start
to start the process, but I would reboot.
Secondly, there are a set of utilities to set the fan speeds for various sensed temperatures. The following is quoted from https://www.neowin.net/forum/topic/1165469-control-fan-speeds-lm_sensors-isnt-working/?tab=comments#comment-595825859
sudo apt-get install lm-sensors
sudo sensors-detect
just follow the prompts. Add the recommended lines to /etc/modules.
Now, if you don't want to reboot, you'll have to manually activate the
modules.
sudo modprobe module1 module2
where module1 etc. = the module names provided from sensors-detect.
Next, you need to create your fancontrol file. The easiest way is to
run pwmconfig.
sudo pwmconfig
and work your way through the instructions there.
Finally, run sensors -s to make your fan configuration take effect.
sudo sensors -s
Now, you can check your temps.
sensors
Now to run fan control, type:
sudo /usr/sbin/fancontrol &
A nice way to visually inspect temps is with gkrellm. To get it:
sudo apt-get install gkrellm
pwmconfig gives me "There are no PWM outputs"
– Dipto Mondal
Feb 22 at 19:14
And the sensors command gives me this "cpu_fan: 0 RPM"
– Dipto Mondal
Feb 22 at 19:15
add a comment |
If you have not installed any of the power management services in Ubuntu, you may find these to be helpful:
First, install Tlp, Thermald, and Lmsensors to create power sensing and management. From the terminal:
sudo apt install tlp thermald
sudo apt install --install-suggests lm-sensors psensor
There are configuration files for Tlp located in /etc/default/tlp which you can customize to fit your needs. You can issue sudo tlp start
to start the process, but I would reboot.
Secondly, there are a set of utilities to set the fan speeds for various sensed temperatures. The following is quoted from https://www.neowin.net/forum/topic/1165469-control-fan-speeds-lm_sensors-isnt-working/?tab=comments#comment-595825859
sudo apt-get install lm-sensors
sudo sensors-detect
just follow the prompts. Add the recommended lines to /etc/modules.
Now, if you don't want to reboot, you'll have to manually activate the
modules.
sudo modprobe module1 module2
where module1 etc. = the module names provided from sensors-detect.
Next, you need to create your fancontrol file. The easiest way is to
run pwmconfig.
sudo pwmconfig
and work your way through the instructions there.
Finally, run sensors -s to make your fan configuration take effect.
sudo sensors -s
Now, you can check your temps.
sensors
Now to run fan control, type:
sudo /usr/sbin/fancontrol &
A nice way to visually inspect temps is with gkrellm. To get it:
sudo apt-get install gkrellm
If you have not installed any of the power management services in Ubuntu, you may find these to be helpful:
First, install Tlp, Thermald, and Lmsensors to create power sensing and management. From the terminal:
sudo apt install tlp thermald
sudo apt install --install-suggests lm-sensors psensor
There are configuration files for Tlp located in /etc/default/tlp which you can customize to fit your needs. You can issue sudo tlp start
to start the process, but I would reboot.
Secondly, there are a set of utilities to set the fan speeds for various sensed temperatures. The following is quoted from https://www.neowin.net/forum/topic/1165469-control-fan-speeds-lm_sensors-isnt-working/?tab=comments#comment-595825859
sudo apt-get install lm-sensors
sudo sensors-detect
just follow the prompts. Add the recommended lines to /etc/modules.
Now, if you don't want to reboot, you'll have to manually activate the
modules.
sudo modprobe module1 module2
where module1 etc. = the module names provided from sensors-detect.
Next, you need to create your fancontrol file. The easiest way is to
run pwmconfig.
sudo pwmconfig
and work your way through the instructions there.
Finally, run sensors -s to make your fan configuration take effect.
sudo sensors -s
Now, you can check your temps.
sensors
Now to run fan control, type:
sudo /usr/sbin/fancontrol &
A nice way to visually inspect temps is with gkrellm. To get it:
sudo apt-get install gkrellm
answered Feb 12 at 18:46
Charles GreenCharles Green
13.9k73859
13.9k73859
pwmconfig gives me "There are no PWM outputs"
– Dipto Mondal
Feb 22 at 19:14
And the sensors command gives me this "cpu_fan: 0 RPM"
– Dipto Mondal
Feb 22 at 19:15
add a comment |
pwmconfig gives me "There are no PWM outputs"
– Dipto Mondal
Feb 22 at 19:14
And the sensors command gives me this "cpu_fan: 0 RPM"
– Dipto Mondal
Feb 22 at 19:15
pwmconfig gives me "There are no PWM outputs"
– Dipto Mondal
Feb 22 at 19:14
pwmconfig gives me "There are no PWM outputs"
– Dipto Mondal
Feb 22 at 19:14
And the sensors command gives me this "cpu_fan: 0 RPM"
– Dipto Mondal
Feb 22 at 19:15
And the sensors command gives me this "cpu_fan: 0 RPM"
– Dipto Mondal
Feb 22 at 19:15
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1062210%2ffan-is-always-on-on-my-asus-rog%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Favor granted: welcome to the fun filled adventure of linux, take apart your computer and clean the dust out of the heat sink, dust is clogging the heat so it can't escape causing your fan to try to put out a fire, but it can't with a wall in the way
– hello moto
Aug 4 '18 at 6:26
But when i use windows i donot face that problem..
– Dipto Mondal
Aug 8 '18 at 19:17
Have you used: top to determine what processes are using near 100 percent to keep the fan high, most common problems are a minconfigured USB port, start unplugging stuff to see when it drops or webcontent without acceleration enabled on your browser.
– hello moto
Aug 8 '18 at 19:50
I face that problem even when i don't use any app...
– Dipto Mondal
Aug 8 '18 at 20:19
can we see the output of: watch "ps aux | sort -nrk 3,3 | head -n 10"
– hello moto
Aug 8 '18 at 20:22