Vultee A-31 Vengeance

Multi tool use
Vultee A-31 Vengeance |
Um Vultee A-31 da Real Força Aérea Australiana, em 1943
|
Descrição
|
Tipo / Missão
|
Bombardeiro de mergulho
|
País de origem
|
Estados Unidos
|
Fabricante
|
Vultee Aircraft
|
Quantidade produzida
|
1931
|
Primeiro voo em
|
30 de março de 1941 (78 anos)
|
Aposentado em
|
Setembro de 1944
|
Tripulação
|
2
|
Aviso
|
|
O Vultee A-31 Vengeance foi um bombardeiro de mergulho norte-americano da Segunda Guerra Mundial. Construído pela Vultee Aircraft, uma versão modificada também foi produzida, o A-35. Apesar de não ter sido usado em combate pelos Estados Unidos, foi usado na linha da frente pela Real Força Aérea, Real Força Aérea Australiana e Força Aérea Indiana.[1][2]
Referências
↑ Drucker, Graham R F. «Vultee A-31 Vengeance aircraft profile. Aircraft Database of the Fleet Air Arm Archive 1939-1945». www.fleetairarmarchive.net. Consultado em 14 de julho de 2017
↑ «Vultee A-35 Vengeance Dive Bomber Aircraft» (em inglês)
 |
Este artigo sobre um avião, integrado ao Projeto Aviação, é um esboço. Você pode ajudar a Wikipédia expandindo-o. |
Portal da aviação
pLc2QTOh PnmxjcLsZXOR bKmAVo,brgkZcIZO3aE
Popular posts from this blog
1
This question is a follow up of this one. I am trying to run a command through the command line on a remote machine running Windows 7 from a workstation running Debian in an SSH session on that machine. The setup is basically as follows: debian box 1 === (SSH) ===> debian box 2 === (RDP) ===> Windows 7 I have tried running rdesktop from debian box 2 : rdesktop <Windows 7 box network address> -u username -p password -r disk:local="./TestRDP" -s "cmd.exe /K net use C: \\tsclientlocal & C:\test.bat & logoff" but cmd.exe is not launched on the remote device. I have also tried to open up cmd.exe on its own: rdesktop <Windows 7 box network address> -u username -p password -s "cmd.exe" but the terminal is not launched upon login ( rdesktop successf...
3
Assumed I want to draw three simple graphs based on the following illustration: How can I plot those three graphs? I've tried to create something like this: Minimum Working Example (MWE): documentclass{standalone} usepackage{pgfplots} begin{document} begin{tikzpicture} begin{axis}[domain=0:1] addplot+[no marks, samples=100] {exp(3*x)}; addplot+[no marks, samples=100] {(-exp(3*x)+20)}; end{axis} end{tikzpicture} end{document} Screenshot of the current state: Description of the issue: However, I don't get the point on how to figure out the function of the third graph as well as how to clip the graphs in x and y direction to align them centered in the plot. It is not necessary to be completely precise, the accuracy of my upper template w...
up vote
0
down vote
favorite
So, my friend has been trying to install Matlab 2018b and he has encountered the following message just after the installation reaches 100%. Matlab installation additional configuration steps message I did some digging around in the Matlab forums and found out that to use the additional components, one should install a compiler and then use the following commands: mex -setup C mex -setup C++ Can anyone help me regarding this error? If this is indeed the solution then how can I execute those steps? Also, he says that even if he presses next, he cannot use matlab. The OS in use is Windows 10.
installation matlab
share | improve this question
...