seagate Central 3TB slow Transfer Speed
I have a seagate central 3TB NAS which is returning very slow file transfer speeds of just 4mbps.
My router is a Buffalo Airstation WHR-G300N and is showing 300mbps connection speed. It is in N (2.4GHz) mode only with 40MHz channel width.
My Laptops wireless card is limiting my connection speed to 65mbps but I would expect to be able to achieve a transfer speed higher than 4Mbps.
Is there anything else I can check/Change? the review sites I've seen claim to have achieved more than 20mbps write speed, I'd be happy with that!
performance nas
|
show 4 more comments
I have a seagate central 3TB NAS which is returning very slow file transfer speeds of just 4mbps.
My router is a Buffalo Airstation WHR-G300N and is showing 300mbps connection speed. It is in N (2.4GHz) mode only with 40MHz channel width.
My Laptops wireless card is limiting my connection speed to 65mbps but I would expect to be able to achieve a transfer speed higher than 4Mbps.
Is there anything else I can check/Change? the review sites I've seen claim to have achieved more than 20mbps write speed, I'd be happy with that!
performance nas
1
I'd strongly suggest that you try connecting via an Ethernet cable. Wireless networks have quite a few unknowns - you may "see" 300Mbps as a setting, but you never know what the interference looks like - overlapping neighbor's access points, "noisy" RFI sources. Have you looked at the WiFi spectrum using MetaGeek's INSSider (the free version)? It will help you check some of the details of the WiFi network and its performance.
– Milen
Jul 28 '15 at 19:49
hmmm INSSider shows that my router is offering b,g,n, data rates even though in my DD-WRT settings screen its set to N only
– xyy81t
Jul 28 '15 at 20:14
Does INSSider show any overlapping networks from other neighboring access points? What about signal-to-noise ratio (S/N or SNR) - should be in dB.
– Milen
Jul 29 '15 at 11:26
There was so I changed to channel 11 which was clean but no change in transfer speed. Will check snr when home later, thanks
– xyy81t
Jul 30 '15 at 11:56
Sorry for the stupid question, but how do you measure the transfer speed?
– Milen
Jul 30 '15 at 16:41
|
show 4 more comments
I have a seagate central 3TB NAS which is returning very slow file transfer speeds of just 4mbps.
My router is a Buffalo Airstation WHR-G300N and is showing 300mbps connection speed. It is in N (2.4GHz) mode only with 40MHz channel width.
My Laptops wireless card is limiting my connection speed to 65mbps but I would expect to be able to achieve a transfer speed higher than 4Mbps.
Is there anything else I can check/Change? the review sites I've seen claim to have achieved more than 20mbps write speed, I'd be happy with that!
performance nas
I have a seagate central 3TB NAS which is returning very slow file transfer speeds of just 4mbps.
My router is a Buffalo Airstation WHR-G300N and is showing 300mbps connection speed. It is in N (2.4GHz) mode only with 40MHz channel width.
My Laptops wireless card is limiting my connection speed to 65mbps but I would expect to be able to achieve a transfer speed higher than 4Mbps.
Is there anything else I can check/Change? the review sites I've seen claim to have achieved more than 20mbps write speed, I'd be happy with that!
performance nas
performance nas
edited Mar 10 '16 at 15:12
Chenmunka
2,79481931
2,79481931
asked Jul 28 '15 at 19:33
xyy81txyy81t
613
613
1
I'd strongly suggest that you try connecting via an Ethernet cable. Wireless networks have quite a few unknowns - you may "see" 300Mbps as a setting, but you never know what the interference looks like - overlapping neighbor's access points, "noisy" RFI sources. Have you looked at the WiFi spectrum using MetaGeek's INSSider (the free version)? It will help you check some of the details of the WiFi network and its performance.
– Milen
Jul 28 '15 at 19:49
hmmm INSSider shows that my router is offering b,g,n, data rates even though in my DD-WRT settings screen its set to N only
– xyy81t
Jul 28 '15 at 20:14
Does INSSider show any overlapping networks from other neighboring access points? What about signal-to-noise ratio (S/N or SNR) - should be in dB.
– Milen
Jul 29 '15 at 11:26
There was so I changed to channel 11 which was clean but no change in transfer speed. Will check snr when home later, thanks
– xyy81t
Jul 30 '15 at 11:56
Sorry for the stupid question, but how do you measure the transfer speed?
– Milen
Jul 30 '15 at 16:41
|
show 4 more comments
1
I'd strongly suggest that you try connecting via an Ethernet cable. Wireless networks have quite a few unknowns - you may "see" 300Mbps as a setting, but you never know what the interference looks like - overlapping neighbor's access points, "noisy" RFI sources. Have you looked at the WiFi spectrum using MetaGeek's INSSider (the free version)? It will help you check some of the details of the WiFi network and its performance.
– Milen
Jul 28 '15 at 19:49
hmmm INSSider shows that my router is offering b,g,n, data rates even though in my DD-WRT settings screen its set to N only
– xyy81t
Jul 28 '15 at 20:14
Does INSSider show any overlapping networks from other neighboring access points? What about signal-to-noise ratio (S/N or SNR) - should be in dB.
– Milen
Jul 29 '15 at 11:26
There was so I changed to channel 11 which was clean but no change in transfer speed. Will check snr when home later, thanks
– xyy81t
Jul 30 '15 at 11:56
Sorry for the stupid question, but how do you measure the transfer speed?
– Milen
Jul 30 '15 at 16:41
1
1
I'd strongly suggest that you try connecting via an Ethernet cable. Wireless networks have quite a few unknowns - you may "see" 300Mbps as a setting, but you never know what the interference looks like - overlapping neighbor's access points, "noisy" RFI sources. Have you looked at the WiFi spectrum using MetaGeek's INSSider (the free version)? It will help you check some of the details of the WiFi network and its performance.
– Milen
Jul 28 '15 at 19:49
I'd strongly suggest that you try connecting via an Ethernet cable. Wireless networks have quite a few unknowns - you may "see" 300Mbps as a setting, but you never know what the interference looks like - overlapping neighbor's access points, "noisy" RFI sources. Have you looked at the WiFi spectrum using MetaGeek's INSSider (the free version)? It will help you check some of the details of the WiFi network and its performance.
– Milen
Jul 28 '15 at 19:49
hmmm INSSider shows that my router is offering b,g,n, data rates even though in my DD-WRT settings screen its set to N only
– xyy81t
Jul 28 '15 at 20:14
hmmm INSSider shows that my router is offering b,g,n, data rates even though in my DD-WRT settings screen its set to N only
– xyy81t
Jul 28 '15 at 20:14
Does INSSider show any overlapping networks from other neighboring access points? What about signal-to-noise ratio (S/N or SNR) - should be in dB.
– Milen
Jul 29 '15 at 11:26
Does INSSider show any overlapping networks from other neighboring access points? What about signal-to-noise ratio (S/N or SNR) - should be in dB.
– Milen
Jul 29 '15 at 11:26
There was so I changed to channel 11 which was clean but no change in transfer speed. Will check snr when home later, thanks
– xyy81t
Jul 30 '15 at 11:56
There was so I changed to channel 11 which was clean but no change in transfer speed. Will check snr when home later, thanks
– xyy81t
Jul 30 '15 at 11:56
Sorry for the stupid question, but how do you measure the transfer speed?
– Milen
Jul 30 '15 at 16:41
Sorry for the stupid question, but how do you measure the transfer speed?
– Milen
Jul 30 '15 at 16:41
|
show 4 more comments
1 Answer
1
active
oldest
votes
Unfortunately, that speed is quite close to what I get in a similar wireless setup. The theoretical max would be (65/8) megabytes/second, and network overhead takes care of the remaining difference.
What does 65/8 mean?
– Layke
Nov 30 '15 at 14:29
Merely bits to bytes conversion
– Kartik Moudgil
Nov 30 '15 at 14:39
Ah okay. I got it :) I see from the original question, he referred to 65Mbit.
– Layke
Nov 30 '15 at 15:44
Yeah, I learnt the hard way about these manufacturer quoted speeds vs what you actually get :(
– Kartik Moudgil
Nov 30 '15 at 15:46
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f946530%2fseagate-central-3tb-slow-transfer-speed%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Unfortunately, that speed is quite close to what I get in a similar wireless setup. The theoretical max would be (65/8) megabytes/second, and network overhead takes care of the remaining difference.
What does 65/8 mean?
– Layke
Nov 30 '15 at 14:29
Merely bits to bytes conversion
– Kartik Moudgil
Nov 30 '15 at 14:39
Ah okay. I got it :) I see from the original question, he referred to 65Mbit.
– Layke
Nov 30 '15 at 15:44
Yeah, I learnt the hard way about these manufacturer quoted speeds vs what you actually get :(
– Kartik Moudgil
Nov 30 '15 at 15:46
add a comment |
Unfortunately, that speed is quite close to what I get in a similar wireless setup. The theoretical max would be (65/8) megabytes/second, and network overhead takes care of the remaining difference.
What does 65/8 mean?
– Layke
Nov 30 '15 at 14:29
Merely bits to bytes conversion
– Kartik Moudgil
Nov 30 '15 at 14:39
Ah okay. I got it :) I see from the original question, he referred to 65Mbit.
– Layke
Nov 30 '15 at 15:44
Yeah, I learnt the hard way about these manufacturer quoted speeds vs what you actually get :(
– Kartik Moudgil
Nov 30 '15 at 15:46
add a comment |
Unfortunately, that speed is quite close to what I get in a similar wireless setup. The theoretical max would be (65/8) megabytes/second, and network overhead takes care of the remaining difference.
Unfortunately, that speed is quite close to what I get in a similar wireless setup. The theoretical max would be (65/8) megabytes/second, and network overhead takes care of the remaining difference.
answered Jul 28 '15 at 19:38
Kartik MoudgilKartik Moudgil
163
163
What does 65/8 mean?
– Layke
Nov 30 '15 at 14:29
Merely bits to bytes conversion
– Kartik Moudgil
Nov 30 '15 at 14:39
Ah okay. I got it :) I see from the original question, he referred to 65Mbit.
– Layke
Nov 30 '15 at 15:44
Yeah, I learnt the hard way about these manufacturer quoted speeds vs what you actually get :(
– Kartik Moudgil
Nov 30 '15 at 15:46
add a comment |
What does 65/8 mean?
– Layke
Nov 30 '15 at 14:29
Merely bits to bytes conversion
– Kartik Moudgil
Nov 30 '15 at 14:39
Ah okay. I got it :) I see from the original question, he referred to 65Mbit.
– Layke
Nov 30 '15 at 15:44
Yeah, I learnt the hard way about these manufacturer quoted speeds vs what you actually get :(
– Kartik Moudgil
Nov 30 '15 at 15:46
What does 65/8 mean?
– Layke
Nov 30 '15 at 14:29
What does 65/8 mean?
– Layke
Nov 30 '15 at 14:29
Merely bits to bytes conversion
– Kartik Moudgil
Nov 30 '15 at 14:39
Merely bits to bytes conversion
– Kartik Moudgil
Nov 30 '15 at 14:39
Ah okay. I got it :) I see from the original question, he referred to 65Mbit.
– Layke
Nov 30 '15 at 15:44
Ah okay. I got it :) I see from the original question, he referred to 65Mbit.
– Layke
Nov 30 '15 at 15:44
Yeah, I learnt the hard way about these manufacturer quoted speeds vs what you actually get :(
– Kartik Moudgil
Nov 30 '15 at 15:46
Yeah, I learnt the hard way about these manufacturer quoted speeds vs what you actually get :(
– Kartik Moudgil
Nov 30 '15 at 15:46
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f946530%2fseagate-central-3tb-slow-transfer-speed%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
I'd strongly suggest that you try connecting via an Ethernet cable. Wireless networks have quite a few unknowns - you may "see" 300Mbps as a setting, but you never know what the interference looks like - overlapping neighbor's access points, "noisy" RFI sources. Have you looked at the WiFi spectrum using MetaGeek's INSSider (the free version)? It will help you check some of the details of the WiFi network and its performance.
– Milen
Jul 28 '15 at 19:49
hmmm INSSider shows that my router is offering b,g,n, data rates even though in my DD-WRT settings screen its set to N only
– xyy81t
Jul 28 '15 at 20:14
Does INSSider show any overlapping networks from other neighboring access points? What about signal-to-noise ratio (S/N or SNR) - should be in dB.
– Milen
Jul 29 '15 at 11:26
There was so I changed to channel 11 which was clean but no change in transfer speed. Will check snr when home later, thanks
– xyy81t
Jul 30 '15 at 11:56
Sorry for the stupid question, but how do you measure the transfer speed?
– Milen
Jul 30 '15 at 16:41