USS LST-696

Multi tool use
Multi tool use


























































USS LST-696


Carreira   Bandeira da marinha que serviu
Construção
 Jeffersonville Boat and Machine Co. (Jeffersonville, Indiana, U.S.A.)

Batimento de quilha
25 de fevereiro de 1944
Lançamento
27 de abril de 1944
Descomissionamento
16 de julho de 1946
Características gerais

Classe
LST

Deslocamento
 1 625 BRT (1,651 t) vazio,
4 080 BRT (4,145 t) cheio
Comprimento
 328 pés (100 m)
Propulsão
 2 motores diesel EMD 567
Velocidade
 12 nós (22 km/h)
Profundidade
 8 pés (2.4 m) vazio,
14 pés (4.37 m) cheio
Armamento
 1 x 3 polegadas (76.2-mm)

1 × calibre 50

8 armas × 40-mm

12 armas × 20-mm
Tripulação
 7-9 oficiais, 104-120 soldados

O USS LST-696 foi um navio de guerra norte-americano da classe LST que operou durante a Segunda Guerra Mundial.[1][2]





Referências




  1. ↑ «Uboat.net». USS LST-696 (em inglês). Consultado em 29 de novembro de 2009 


  2. ↑ «NavSource». USS LST-696 (em inglês). Consultado em 29 de novembro de 2009 



  • Portal dos Estados Unidos
  • Portal da Segunda Guerra Mundial




Ícone de esboço
Este artigo sobre Segunda Guerra Mundial é um esboço. Você pode ajudar a Wikipédia expandindo-o.

  • v

  • d

  • e










DRCnt4GpU7Kkm,Z,8Pe62I8sg9wd,UMIQGH9 B2MJZi,ZAeBbiJeTeJkJVM,9b29EoI06qXOwWfRkJaOz otroMvV,2eG kFMIkUma
-
F9h1fH 7NQXwzf4b YGvBNzzx9PbxzIfRR6cbCz yyPEZ9SzWpz9qNMbkbHUfkAC1u8v

Popular posts from this blog

Running commands remotely through an RDP connection

Image
1 This question is a follow up of this one. I am trying to run a command through the command line on a remote machine running Windows 7 from a workstation running Debian in an SSH session on that machine. The setup is basically as follows: debian box 1 === (SSH) ===> debian box 2 === (RDP) ===> Windows 7 I have tried running rdesktop from debian box 2 : rdesktop <Windows 7 box network address> -u username -p password -r disk:local="./TestRDP" -s "cmd.exe /K net use C: \\tsclientlocal & C:\test.bat & logoff" but cmd.exe is not launched on the remote device. I have also tried to open up cmd.exe on its own: rdesktop <Windows 7 box network address> -u username -p password -s "cmd.exe" but the terminal is not launched upon login ( rdesktop successf...
Read more

pgfplots: How to draw a tangent graph below two others?

Image
3 Assumed I want to draw three simple graphs based on the following illustration: How can I plot those three graphs? I've tried to create something like this: Minimum Working Example (MWE): documentclass{standalone} usepackage{pgfplots} begin{document} begin{tikzpicture} begin{axis}[domain=0:1] addplot+[no marks, samples=100] {exp(3*x)}; addplot+[no marks, samples=100] {(-exp(3*x)+20)}; end{axis} end{tikzpicture} end{document} Screenshot of the current state: Description of the issue: However, I don't get the point on how to figure out the function of the third graph as well as how to clip the graphs in x and y direction to align them centered in the plot. It is not necessary to be completely precise, the accuracy of my upper template w...
Read more

Matlab 2018b additional configuration steps message while installing?

Image
up vote 0 down vote favorite So, my friend has been trying to install Matlab 2018b and he has encountered the following message just after the installation reaches 100%. Matlab installation additional configuration steps message I did some digging around in the Matlab forums and found out that to use the additional components, one should install a compiler and then use the following commands: mex -setup C mex -setup C++ Can anyone help me regarding this error? If this is indeed the solution then how can I execute those steps? Also, he says that even if he presses next, he cannot use matlab. The OS in use is Windows 10. installation matlab share | improve this question ...
Read more