USB device connecting and disconnecting repeatedly
up vote
2
down vote
favorite
I was having some problems booting into Ubuntu. After trying to reboot for sometime, I eventually opened the 4.4.0-31 recovery mode. while it was booting into recovery mode, it said that /dev/ubuntu-gnome-vg needs to fsck manually.
While this was going on the touchscreen for the computer was connecting and disconnecting repeatedly.
The screen was showing this:
usb 2-7: new full-speed USB device number 42 using using xchi_hcd
usb 2-7: New USB device found, idVendor=04f3, idproduct=016f
usb 2-7: New USB device strings: Mfr=4, Product =14, SerialNumber=0
usb 2-7: Product: Touchscreen
usb 2-7: Manufacturer: ELAN
usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc
says 80 microframes
usb 2-7: USB disconnect, device number 42.
and then this repeats with the device being 43.
How do I stop this so that I can actually try and fix the problem on the disk. Also if you guys have some advice regarding /dev/ubuntu-gnome-vg needing to be fsck'd that be great.
boot usb fsck recovery-mode disconnect
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
add a comment |
up vote
2
down vote
favorite
I was having some problems booting into Ubuntu. After trying to reboot for sometime, I eventually opened the 4.4.0-31 recovery mode. while it was booting into recovery mode, it said that /dev/ubuntu-gnome-vg needs to fsck manually.
While this was going on the touchscreen for the computer was connecting and disconnecting repeatedly.
The screen was showing this:
usb 2-7: new full-speed USB device number 42 using using xchi_hcd
usb 2-7: New USB device found, idVendor=04f3, idproduct=016f
usb 2-7: New USB device strings: Mfr=4, Product =14, SerialNumber=0
usb 2-7: Product: Touchscreen
usb 2-7: Manufacturer: ELAN
usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc
says 80 microframes
usb 2-7: USB disconnect, device number 42.
and then this repeats with the device being 43.
How do I stop this so that I can actually try and fix the problem on the disk. Also if you guys have some advice regarding /dev/ubuntu-gnome-vg needing to be fsck'd that be great.
boot usb fsck recovery-mode disconnect
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
I am having the exact same issue, did you manage to solve this issue?
– theAlse
Sep 6 '17 at 8:00
add a comment |
up vote
2
down vote
favorite
up vote
2
down vote
favorite
I was having some problems booting into Ubuntu. After trying to reboot for sometime, I eventually opened the 4.4.0-31 recovery mode. while it was booting into recovery mode, it said that /dev/ubuntu-gnome-vg needs to fsck manually.
While this was going on the touchscreen for the computer was connecting and disconnecting repeatedly.
The screen was showing this:
usb 2-7: new full-speed USB device number 42 using using xchi_hcd
usb 2-7: New USB device found, idVendor=04f3, idproduct=016f
usb 2-7: New USB device strings: Mfr=4, Product =14, SerialNumber=0
usb 2-7: Product: Touchscreen
usb 2-7: Manufacturer: ELAN
usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc
says 80 microframes
usb 2-7: USB disconnect, device number 42.
and then this repeats with the device being 43.
How do I stop this so that I can actually try and fix the problem on the disk. Also if you guys have some advice regarding /dev/ubuntu-gnome-vg needing to be fsck'd that be great.
boot usb fsck recovery-mode disconnect
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
I was having some problems booting into Ubuntu. After trying to reboot for sometime, I eventually opened the 4.4.0-31 recovery mode. while it was booting into recovery mode, it said that /dev/ubuntu-gnome-vg needs to fsck manually.
While this was going on the touchscreen for the computer was connecting and disconnecting repeatedly.
The screen was showing this:
usb 2-7: new full-speed USB device number 42 using using xchi_hcd
usb 2-7: New USB device found, idVendor=04f3, idproduct=016f
usb 2-7: New USB device strings: Mfr=4, Product =14, SerialNumber=0
usb 2-7: Product: Touchscreen
usb 2-7: Manufacturer: ELAN
usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc
says 80 microframes
usb 2-7: USB disconnect, device number 42.
and then this repeats with the device being 43.
How do I stop this so that I can actually try and fix the problem on the disk. Also if you guys have some advice regarding /dev/ubuntu-gnome-vg needing to be fsck'd that be great.
boot usb fsck recovery-mode disconnect
boot usb fsck recovery-mode disconnect
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
edited Aug 20 '16 at 16:40
Hizqeel
1,72751221
1,72751221
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
asked Aug 20 '16 at 13:18
Gautam Raghuvanshi
1112
1112
I am having the exact same issue, did you manage to solve this issue?
– theAlse
Sep 6 '17 at 8:00
add a comment |
I am having the exact same issue, did you manage to solve this issue?
– theAlse
Sep 6 '17 at 8:00
I am having the exact same issue, did you manage to solve this issue?
– theAlse
Sep 6 '17 at 8:00
I am having the exact same issue, did you manage to solve this issue?
– theAlse
Sep 6 '17 at 8:00
add a comment |
2 Answers
2
active
oldest
votes
up vote
0
down vote
This looks suspiciously similar like a broken USB cable or port. I can say that for sure because I'm using such: every time I'm touching a cable of my USB hub, I see in /var/log/syslog a wall of those messages about (dis) connection, and increasing device number; and the connected mouse resets its sensitivity.
Just for the record, here's an example of mine log:
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366422] usb 4-1.1: USB disconnect, device number 25
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366428] usb 4-1.1.2: USB disconnect, device number 26
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366730] usb 4-1.1.3: USB disconnect, device number 27
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.690545] usb 4-1.1: new high-speed USB device number 28 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774736] hub 4-1.1:1.0: USB hub found
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774788] hub 4-1.1:1.0: 4 ports detected
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.043972] usb 4-1.1.2: new low-speed USB device number 29 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142289] input: HID 192f:0716 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.0/0003:192F:0716.0019/input/input49
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142518] hid-generic 0003:192F:0716.0019: input,hidraw0: USB HID v1.11 Mouse [HID 192f:0716] on usb-0000:00:1d.0-1.1.2/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.207327] usb 4-1.1.3: new low-speed USB device number 30 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.320867] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.0/0003:04D9:1702.001A/input/input50
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.374364] hid-generic 0003:04D9:1702.001A: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.391406] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.1/0003:04D9:1702.001B/input/input51
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.444140] hid-generic 0003:04D9:1702.001B: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input1
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
add a comment |
up vote
0
down vote
Temporarily disconnect your touchscreen device from its USB port. Then boot the computer into RECOVERY mode from the GRUB menu, choose ROOT, then type sudo fsck -f /dev/ubuntu-gnome-vg. Let us know how that works. Cheers, Al
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f814569%2fusb-device-connecting-and-disconnecting-repeatedly%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
This looks suspiciously similar like a broken USB cable or port. I can say that for sure because I'm using such: every time I'm touching a cable of my USB hub, I see in /var/log/syslog a wall of those messages about (dis) connection, and increasing device number; and the connected mouse resets its sensitivity.
Just for the record, here's an example of mine log:
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366422] usb 4-1.1: USB disconnect, device number 25
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366428] usb 4-1.1.2: USB disconnect, device number 26
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366730] usb 4-1.1.3: USB disconnect, device number 27
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.690545] usb 4-1.1: new high-speed USB device number 28 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774736] hub 4-1.1:1.0: USB hub found
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774788] hub 4-1.1:1.0: 4 ports detected
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.043972] usb 4-1.1.2: new low-speed USB device number 29 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142289] input: HID 192f:0716 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.0/0003:192F:0716.0019/input/input49
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142518] hid-generic 0003:192F:0716.0019: input,hidraw0: USB HID v1.11 Mouse [HID 192f:0716] on usb-0000:00:1d.0-1.1.2/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.207327] usb 4-1.1.3: new low-speed USB device number 30 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.320867] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.0/0003:04D9:1702.001A/input/input50
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.374364] hid-generic 0003:04D9:1702.001A: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.391406] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.1/0003:04D9:1702.001B/input/input51
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.444140] hid-generic 0003:04D9:1702.001B: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input1
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
add a comment |
up vote
0
down vote
This looks suspiciously similar like a broken USB cable or port. I can say that for sure because I'm using such: every time I'm touching a cable of my USB hub, I see in /var/log/syslog a wall of those messages about (dis) connection, and increasing device number; and the connected mouse resets its sensitivity.
Just for the record, here's an example of mine log:
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366422] usb 4-1.1: USB disconnect, device number 25
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366428] usb 4-1.1.2: USB disconnect, device number 26
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366730] usb 4-1.1.3: USB disconnect, device number 27
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.690545] usb 4-1.1: new high-speed USB device number 28 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774736] hub 4-1.1:1.0: USB hub found
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774788] hub 4-1.1:1.0: 4 ports detected
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.043972] usb 4-1.1.2: new low-speed USB device number 29 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142289] input: HID 192f:0716 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.0/0003:192F:0716.0019/input/input49
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142518] hid-generic 0003:192F:0716.0019: input,hidraw0: USB HID v1.11 Mouse [HID 192f:0716] on usb-0000:00:1d.0-1.1.2/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.207327] usb 4-1.1.3: new low-speed USB device number 30 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.320867] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.0/0003:04D9:1702.001A/input/input50
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.374364] hid-generic 0003:04D9:1702.001A: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.391406] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.1/0003:04D9:1702.001B/input/input51
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.444140] hid-generic 0003:04D9:1702.001B: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input1
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
add a comment |
up vote
0
down vote
up vote
0
down vote
This looks suspiciously similar like a broken USB cable or port. I can say that for sure because I'm using such: every time I'm touching a cable of my USB hub, I see in /var/log/syslog a wall of those messages about (dis) connection, and increasing device number; and the connected mouse resets its sensitivity.
Just for the record, here's an example of mine log:
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366422] usb 4-1.1: USB disconnect, device number 25
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366428] usb 4-1.1.2: USB disconnect, device number 26
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366730] usb 4-1.1.3: USB disconnect, device number 27
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.690545] usb 4-1.1: new high-speed USB device number 28 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774736] hub 4-1.1:1.0: USB hub found
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774788] hub 4-1.1:1.0: 4 ports detected
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.043972] usb 4-1.1.2: new low-speed USB device number 29 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142289] input: HID 192f:0716 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.0/0003:192F:0716.0019/input/input49
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142518] hid-generic 0003:192F:0716.0019: input,hidraw0: USB HID v1.11 Mouse [HID 192f:0716] on usb-0000:00:1d.0-1.1.2/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.207327] usb 4-1.1.3: new low-speed USB device number 30 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.320867] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.0/0003:04D9:1702.001A/input/input50
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.374364] hid-generic 0003:04D9:1702.001A: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.391406] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.1/0003:04D9:1702.001B/input/input51
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.444140] hid-generic 0003:04D9:1702.001B: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input1
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
This looks suspiciously similar like a broken USB cable or port. I can say that for sure because I'm using such: every time I'm touching a cable of my USB hub, I see in /var/log/syslog a wall of those messages about (dis) connection, and increasing device number; and the connected mouse resets its sensitivity.
Just for the record, here's an example of mine log:
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366422] usb 4-1.1: USB disconnect, device number 25
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366428] usb 4-1.1.2: USB disconnect, device number 26
Aug 20 17:22:38 constantine-N61Ja kernel: [55857.366730] usb 4-1.1.3: USB disconnect, device number 27
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.690545] usb 4-1.1: new high-speed USB device number 28 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774736] hub 4-1.1:1.0: USB hub found
Aug 20 17:22:39 constantine-N61Ja kernel: [55857.774788] hub 4-1.1:1.0: 4 ports detected
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.043972] usb 4-1.1.2: new low-speed USB device number 29 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142289] input: HID 192f:0716 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.0/0003:192F:0716.0019/input/input49
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.142518] hid-generic 0003:192F:0716.0019: input,hidraw0: USB HID v1.11 Mouse [HID 192f:0716] on usb-0000:00:1d.0-1.1.2/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.207327] usb 4-1.1.3: new low-speed USB device number 30 using ehci-pci
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.320867] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.0/0003:04D9:1702.001A/input/input50
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.374364] hid-generic 0003:04D9:1702.001A: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input0
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.391406] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.1/0003:04D9:1702.001B/input/input51
Aug 20 17:22:39 constantine-N61Ja kernel: [55858.444140] hid-generic 0003:04D9:1702.001B: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.1.3/input1
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
answered Aug 20 '16 at 14:20
Hi-Angel
2,17211625
2,17211625
add a comment |
add a comment |
up vote
0
down vote
Temporarily disconnect your touchscreen device from its USB port. Then boot the computer into RECOVERY mode from the GRUB menu, choose ROOT, then type sudo fsck -f /dev/ubuntu-gnome-vg. Let us know how that works. Cheers, Al
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
add a comment |
up vote
0
down vote
Temporarily disconnect your touchscreen device from its USB port. Then boot the computer into RECOVERY mode from the GRUB menu, choose ROOT, then type sudo fsck -f /dev/ubuntu-gnome-vg. Let us know how that works. Cheers, Al
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
add a comment |
up vote
0
down vote
up vote
0
down vote
Temporarily disconnect your touchscreen device from its USB port. Then boot the computer into RECOVERY mode from the GRUB menu, choose ROOT, then type sudo fsck -f /dev/ubuntu-gnome-vg. Let us know how that works. Cheers, Al
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
Temporarily disconnect your touchscreen device from its USB port. Then boot the computer into RECOVERY mode from the GRUB menu, choose ROOT, then type sudo fsck -f /dev/ubuntu-gnome-vg. Let us know how that works. Cheers, Al
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
answered Aug 20 '16 at 18:01
heynnema
17.7k22053
17.7k22053
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f814569%2fusb-device-connecting-and-disconnecting-repeatedly%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I am having the exact same issue, did you manage to solve this issue?
– theAlse
Sep 6 '17 at 8:00